PRIMERGY TX150 S4

System configurator and order-information guide
H PRIMERGY TX150 S4 Status 2006-02-21
continued
on previous E. 2-Kanal Ultra 320 SCSI Controller für Disk Array
page
S26361-F3006-E128
S26361-F3090-E256
2-channel RAID Controller U320 2-channel RAID Controller U320
LSI
LSI
320-2 320-2x
128MB SDRAM ECC Cache 256MB SDRAM ECC Cache Not for
1x default with TBBU default with TBBU SATA variant!
plug: internal 2x HD68; plug: internal 2x HD68;
external: 2x VHDCI external: 2x VHDCI
without cable without cable
64/66 PCI controller, 180mm 64/133 PCI-X controller, 180mm
3.3V and 5V tolerant signaling 3.3V and 5V tolerant signaling
max. 1x per system max. 1x per system
The fitting connection cables can be found in the configurator
of the external storage system and / or rack.
S26361-F2814-E6 Backup drive and HDD should run on separate channels.
68-Pin Kit for accessible drives
Cable with Terminator
To connect acc. drives to If internal HDD's are connected at the RAID controller
separate SCSI controller (not IME/ZCR), then for internal accessible drives
max. 1x per system the cable S26361-F2814-E6 must be ordered additionally!
F. 4. Port SATA RAID 5 controller for Disk Array
as soon as available
S26361-F3216-E1
SATA RAID 5 Controller
128MB SDRAM ECC Cache
BBU
optional
Plug: int.8x SATA 3Gb
1x PCI x4 Not for
max. 1x per system SCSI variant!
as soon as available
S26361-F3216-E10
Cache Battery Backup Unit
max. 1x per controller
I
Fujitsu Siemens Computers
Enterprise Products - PRIMERGY Server 14 of 18