PRIMERGY TX150 S3
PRIMERGY TX150 S3
PRIMERGY TX150 S3
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>PRIMERGY</strong> <strong>TX150</strong> <strong>S3</strong>System configurator and order-information guideMarch 2006ContentsInstructionsConfigurationdiagramConfigurator0 System softwareI Basic unitI I ProcessorI I I MemoryI V GraphicsV Accessible drivesVI Hard disk drivesVII SCSI ControllerV I I I Disk arrayI X Communication/NetworkX System management optionsX I MiscellaneousX I I Country specific optionsChangereport<strong>PRIMERGY</strong> Server
System configurator and order-information guideStart <strong>PRIMERGY</strong> <strong>TX150</strong> <strong>S3</strong> <strong>PRIMERGY</strong> <strong>TX150</strong> <strong>S3</strong> Status 2006-02-21SW Configurator 32 bitwith OEM-Softwarewithout OEM-Softwarefor <strong>PRIMERGY</strong> Server for <strong>PRIMERGY</strong> ServerLater use of OEM operatingVMware-Software system software is not allowed,- VCMS VirtualCenter Management Server apart from few VMware- GSX Server and GSX Virtual Infrastructure Node add-ons- P2V Assistant Enterprise EditionFor all SW products please refer to the corresponding software configurator accessible viathe Extranet under Configuration & Tools, -All configurations, -Software, URL see below.Microsoft - Software: W **) NetWare: ***) PRIMECLUSTER *)- Small Business Server 2003 - Netware - Clustering- Windows Server 2003, - Open Enterprise Server - Load BalancingWeb Edition (only English) contains NetWareStandardEditionEnterpriseEditionCITRIX-Software fürWindows: W-MF- Presentation Server SCO - Software: **)LoadBalancing - SCO OpenServerAdditional User Licences - SCO UnixWareLinux - Software: L **)- SUSE Linux Enterprise Server: S- SUSE Professional Linux- Red Hat Enterprise LinuxAdaptive Services Control Center (ASCC)*)ASCC Satellite NodeSLES, RHEL, W2K3 Details eg. version numbers are publishedin the separate SW-Configurator*) Pay attention to the ASCC release and ordering information in the Extranet underManageability Software: V**)http://extranet.fujitsu-siemens.com/ascc- RemoteView Software- RemoteView Service Board- Altiris Server Deployment *) Pay attention to the PRIMECLUSTER release and ordering information in the Extranet underhttp://extranet.fujitsu-siemens.com/primeclusterBackup-Software / **) Pay attention to the release and ordering information in PRINCE -> Operating SystemApplication-Software: Uhttp://vil.mch.fsc.net/vil/pc/vil/primergy/overview/prince/index_en.htm- ARCserve- openSM2***) Supply over distribution or procurement from FSC VP BC SoftwareVarious Software Configurators and release lists (OS-Matrix / System Management / Security) can be optain under the following adresses:for internal users:for partners:http://vil.mch.fsc.net/vil/oec/special/primergy/index_en.htmhttp://vilpart.fujitsu-siemens.de/vil/oec/special/primergy/index_en.htmContinue with <strong>PRIMERGY</strong>HW configuratorFujitsu Siemens ComputersEnterprise Products - <strong>PRIMERGY</strong> Server 4 of 18
System configurator and order-information guideStart <strong>PRIMERGY</strong> <strong>TX150</strong> <strong>S3</strong> <strong>PRIMERGY</strong> <strong>TX150</strong> <strong>S3</strong> Status 2006-02-21SW Configurator EM64Twith OEM-Softwarewithout OEM-Softwarefor <strong>PRIMERGY</strong> Server for <strong>PRIMERGY</strong> ServerLater use of OEM operating systemFor all SW products please refer to the corresponding software is not allowed.software configurator accessible via the Extranet under"Configuration & Tools, -All configurations, -Software,URL see below.Linux - Software: L *) **)only - SuSE Linux Enterprise ServerEM64T - Red Hat Enterprise Linuxonly MultiPath, Duplex Data Manager (DDM)EM64T Windows, Linux (W-DDM)Manageability Software: V**)Details eg. version numbers are publishedin the separate SW-Configuratoronly - RemoteView SoftwareEM64T - RemoteView Service Board- RemoteView Diagnosis *) Pay attention to the PRIMECLUSTER release and ordering information in the Extranet underhttp://extranet.fujitsu-siemens.com/primecluster**) Pay attention to the release and ordering information in PRINCE -> Operating Systemhttp://vil.mch.fsc.net/vil/pc/vil/primergy/overview/prince/index_en.htmYou'll find single software configurators and release lists (OS-matrix / system management / security) under following addresses:for internal users:for partners:http://vil.mch.fsc.net/vil/oec/special/primergy/index_en.htmhttp://vilpart.fujitsu-siemens.de/vil/oec/special/primergy/index_en.htmContinue with <strong>PRIMERGY</strong>HW configuratorFujitsu Siemens ComputersEnterprise Products - <strong>PRIMERGY</strong> Server 5 of 18
System configurator and order-information guideA <strong>PRIMERGY</strong> <strong>TX150</strong> <strong>S3</strong> Status 2006-02-21Floorstand version basic unit 19" Rack version basic unit (5 U)incl. installation kit for stand. SCSI / RAID HDDsincl. installation kit for stand. SCSI / RAID HDDsPentium 4 processor, memoryPentium 4 processor, memoryP4 3.0GHz/800MHz/1MB 256MB - S26361-K980-V107* P4 3.0GHz/800MHz/1MB 256MB - S26361-K980-V307*P4 3.0GHz/800MHz/1MB 512MB - S26361-K980-V117* P4 3.0GHz/800MHz/1MB 512MB - S26361-K980-V317*P4 3.0GHz/800MHz/1MB 1GB - S26361-K980-V127* P4 3.0GHz/800MHz/1MB 1GB - S26361-K980-V327*P4 3.2GHz/800MHz/1MB 512MB - S26361-K980-V118* P4 3.2GHz/800MHz/1MB 512MB - S26361-K980-V318*P4 3.2GHz/800MHz/1MB 1GB - S26361-K980-V128* P4 3.2GHz/800MHz/1MB 1GB - S26361-K980-V328*P4 3.6GHz/800MHz/1MB 512MB - S26361-K980-V120* P4 3.6GHz/800MHz/1MB 512MB - S26361-K980-V320*P4 3.6GHz/800MHz/1MB 1GB - S26361-K980-V130* P4 3.6GHz/800MHz/1MB 1GB - S26361-K980-V330*Floorstand version basic unit 19" Rack version basic unit (5 U)incl. Promise Fast Trak 150TX (RAID 0/1/10), incl. Promise Fast Trak 150TX (RAID 0/1/10),installtion kit for standard SATA RAID HDDsinstalltion kit for standard SATA RAID HDDsCeleron processor, memoryCeleron processor, memoryCeleron 2.8GHz/533MHz/256kB 512MB - S26361-K980-V242* Celeron 2.8GHz/533MHz/256kB 512MB - S26361-K980-V442*Celeron 2.8GHz/533MHz/256kB 1GB - S26361-K980-V252* Celeron 2.8GHz/533MHz/256kB 1GB - S26361-K980-V452*Pentium 4 processor, memoryPentium 4 processor, memoryP4 3.0GHz/800MHz/1MB 256MB - S26361-K980-V207* P4 3.0GHz/800MHz/1MB 256MB - S26361-K980-V407*P4 3.0GHz/800MHz/1MB 512MB - S26361-K980-V217 P4 3.0GHz/800MHz/1MB 512MB - S26361-K980-V417P4 3.0GHz/800MHz/1MB 1GB - S26361-K980-V227 P4 3.0GHz/800MHz/1MB 1GB - S26361-K980-V427P4 3.2GHz/800MHz/1MB 512MB - S26361-K980-V218 P4 3.2GHz/800MHz/1MB 512MB - S26361-K980-V418P4 3.2GHz/800MHz/1MB 1GB - S26361-K980-V228 P4 3.2GHz/800MHz/1MB 1GB - S26361-K980-V428P4 3.6GHz/800MHz/1MB 512MB - S26361-K980-V220 P4 3.6GHz/800MHz/1MB 512MB - S26361-K980-V420P4 3.6GHz/800MHz/1MB 1GB - S26361-K980-V230 P4 3.6GHz/800MHz/1MB 1GB - S26361-K980-V430* -All basic units with 256MB memory,with install. kit for stand. SCSI / RAID HDDs,with Celeron CPU, are available "while stocks last".S26113-F483-E1 floorstand S26113-F483-E1hot plug power supply upgrade option versions hot plug power supply upgrade optionWith this option the basic units contains A second, redundant With this option the basic units contains1 hot plug power supply, 1 power power supply requires 1 hot plug power supply, 1 powerbackplane and 1 dummy cover an additional power backplane and 1 dummy coverreplacing the standard power supply c o r d replacing the standard power supply(no redundancy !) (section XII) (no redundancy !)max. 1x per system max. 1x per systemS26113-F483-E11S26113-F483-E112nd power supply module (PSU) 2nd power supply module (PSU)for redundancy for redundancyoccupies one bay for occupies one bay forhot plug power supply hot plug power supplymax. 1x per system max. 1x per systemFor later conversion of basic units with standard power supplyto hot plug power supply, the following kit is available:1.) hot plug PS upgrade kit, incl. 2 PS modules: S26113-F483-L1Conversion standard into hot plug PS2.) Supplementary power supply module S26113-F483-L11for redundancy or repairB1B2Fujitsu Siemens ComputersEnterprise Products - <strong>PRIMERGY</strong> Server 7 of 18
System configurator and order-information guideB1 B2 <strong>PRIMERGY</strong> <strong>TX150</strong> <strong>S3</strong> Status 2006-02-21<strong>PRIMERGY</strong> Floorstand<strong>PRIMERGY</strong> RackPRIMECENTER- RackSNP:SY-F1647E301-P"rack-mounting ex factory"Installation ex works for oneThis service is to be ordered onceserver or subsystemper installable server/storageHereby the rack will be deliveredsubsystem, in order to get thecompletely pre-mounted andserver/storage subsystemall wired connections are testedmounted into the <strong>PRIMERGY</strong> racks.With racks 12U, 24U, 38U: In case of the 46 U <strong>PRIMERGY</strong> rack,Systems and components this service has to be ordered,will be delivered installed in the rack to get the mounting kits and theWith racks 46U: cables installed.Systems and componentswill be delivered separatelyTo be ordered only together witha<strong>PRIMERGY</strong>-PRIMECENTERracke.g.:SNP:SY-K614V10x-PS26361-K826-V10xrefer configurator PC-rackmax. 1x per SystemS26361-F2734-E31<strong>PRIMERGY</strong> 42/23U RackMounting kit for <strong>PRIMERGY</strong> 150 / C200 / <strong>TX150</strong> This kit can be ordered,- 1 pair of telescopic rails (735-770mm) if it is planned to mount the rack- 1 pair of carrier rails version in an already available- 1 bracket PC-rack FSC 42/23U rack- 1 cable management PC-racks S26361-F1331-L7Mounting kit for mounting of servers in Mounting kit for 42/23U rackin FSC 19" racks and all server racks - 1 pair of carrier railsconforming to EIA standard EIA-310-D - 1 pair of telescopic railsfor 19" racks. Therefore the mounting kit - 1 cable carrieris variable in deepth from 735-770mm *1) max. 1x per systemThe mounting kit is required for the mountinginto a <strong>PRIMERGY</strong> PRIMECENTERrackwith 12, 24, 38 or 46U (height units).Without this mounting kit the mounting into a<strong>PRIMERGY</strong> rack will not be possible.max. 1x per systemFor later conversion of <strong>TX150</strong> base unit floorstand into base unit rack the following kit is availible1.) Conversion <strong>TX150</strong> base unit floorstand into base unit rack S26361-F2618-L220rack mount kit has to be ordered separatelyFor (later) mounting in racks the following kits are available:1.) <strong>PRIMERGY</strong> Classic-rack 42/23U rack mounting kit: S26361-F1331-L7incl. cable carrier2.) <strong>PRIMERGY</strong> DC- / PC- rack mounting kit: S26361-F2734-L31incl. DC- PC- bracket, cable managment *1)3.) <strong>PRIMERGY</strong> mounting kit for server racks S26361-F2734-L31conforming to EIA standards EIA-310-D for 19" racks.CFujitsu Siemens ComputersEnterprise Products - <strong>PRIMERGY</strong> Server 8 of 18
System configurator and order-information guideC <strong>PRIMERGY</strong> <strong>TX150</strong> <strong>S3</strong> Status 2006-02-21Section II ProcessorSection III MemoryThere are 4 memory banks with 1 DIMM slot each.Mix and match is unrestricted possible.If dual channel performance is needed, the modules have to be ordered by pairs!S26361-F3019-E512 S26361-F3019-E513 S26361-F3019-E514Main memory 256MB Main memory 512MB Main memory 1GB3x PC3200 unbuffered DDR RAM PC3200 unbuffered DDR RAM PC3200 unbuffered DDR RAMconsisting of one module consisting of one module consisting of one moduleoccupies one slot occupies one slot occupies one slotmax. 3x per system max. 3x per system max. 3x per systemSection IV GraphicsGraphic controller 8MB integrated in chip setDFujitsu Siemens ComputersEnterprise Products - <strong>PRIMERGY</strong> Server 9 of 18
System configurator and order-information guideD <strong>PRIMERGY</strong> <strong>TX150</strong> <strong>S3</strong> Status 2006-02-21Section V Accessible drivesThere are 3x 5.25" bays for accessible drives:- 1x 5.25" bay is occupied by a DVD-/CD- respectively a CD-RW drive- 2 x 5.25" bays remaining, can be occupied by2x accessible drives2xSNP:SY-F2234E1-A SNP:SY-F2240E1-A S26361-F3008-E1 S26361-F3148-E1DVD-ROM ATAPI CD-ROM ATAPI CD-RW / DVD drive DVD-RW 16x super multi drive48/32/48x / 16x ATAPI all formats, DUAL/DL, DVD-RAMincl. description (Ger/US) incl. description (Ger/US) only W2K, W3K and Linux only W2K, W3K and Linux1.6 x 5.25", anthracite bezel 1.6 x 5.25", anthracite bezel 1.6 x 5.25", anthracite bezel 1.6 x 5.25", anthracite bezelmax. 2x per system max. 2x per system max. 1x per system max. 1x per systemS26361-F3157-E3Tape drive LTO2HH Ultrium200GB, 24MB/s, U160 SCSIConnector:HD68withoutcableincl. description (Ger/US)data and cleaning cartridge1.6 * 5.25", anthracite bezelmax. 1x per systemS26361-F2849-E3 S26361-F3224-E3 If is used a tape drive inTape drive VXA-2 Tape drive VXA-320 the SATA- variant, the80GB, 6MB/s, U2W SCSI 160GB, 12MB/s, U160 SCSI SCSI 160 ControllerConnector: HD68 Connector: HD68 S26361-F2399-E2 and the2x without cable without cable SCSI cable S26361-F2814-E6incl. description (Ger/US) incl. description (Ger/US) is to order.data and cleaning catridge data and cleaning cartridge1.6 x 5.25", anthracite bezel 1.6 * 5.25", anthracite bezelmax. 2x per system max. 1x per systemS26361-F2848-E3Tape drive DDS Gen5S26361-F2848-E31 (only for OBDR)DDS-G5 for One buttom dis. recov.36GB, 3MB/s, U2W SCSIConnector:HD68withoutcableincl. description (Ger/US)data and cleaning catridge1.6 x 5.25", anthracite bezelmax. 2x per systemS26361-F2814-E6 Backup drive and hard disk should run on separate channels68-Pin Kit for accessible drivesCable with TerminatorTo connect acc. drives to If internal HDD's at the RAID controller (not IME/ZCR)separate SCSI controller are operated, for internal accessible drivesmax. 1x per system the cable S26361-F2814-E6 is to order additionally!(that does not apply to SATA variant)EFujitsu Siemens ComputersEnterprise Products - <strong>PRIMERGY</strong> Server 10 of 18
System configurator and order-information guideE <strong>PRIMERGY</strong> <strong>TX150</strong> <strong>S3</strong> Status 2006-02-21S26361-F2826-E1HDD-Box for additional3x 1" Ultra 320 SCSI HDD's Only for SCSI variantincl. SCSI cable Only with LSI 2 channel RAID controlleroccupies 2 accessible S26361-F3006-E128 or -F3090-E2565.25" x 1.6" drive bays3,2 x 5,25", black bezelmax. 1x per systemSection VI Hard Disk DrivesS26361-F3121-E173 S26361-F3121-E114 S26361-F3121-E130Hard disk 73GB in 1" carrier Hard disk 146GB in 1" carrier Hard disk 300GB in 1" carrier10000rpm,
S y s t e m c o n f i g u r a t o r a n d o r d e r - i n f o r m a t i o n g u i d eF <strong>PRIMERGY</strong> <strong>TX150</strong> <strong>S3</strong> Status 2006-02-21Section VII SCSI-ControllerAll internal cables and adapters are included within the basic units and components respectivelyCabeling priorities:internal HDs are cabled according to following priorities.(Prio 1 - 3 ):1.) For a configuration without any Disk Array Controller and without zero channel RAIDthe onboard U320 Controller is connected to the internal HDs.2.) For a configuration with a 2-channel Disk Array controller (without zero-channel RAID)One channel will be connected with the internal hard disks.The second channel is externally available.3.) For a configuration with a 2-channel Disk Array controller with HDD-box(without zero-channel RAID)One channel will be connected with the internal hard disks.The second channel is connected to the HDD-box.internal backup devices are cabled according to following priorities.(Prio 1 - 2 ):1) For a configuration without additional SCSI controllerthe onboard U320 controller is connected to internal backup devices2) For a configuration with Adaptec SCSI Card 29160 S26361-F2399-E2(without SCSI 160 controller S26361-F2644-E11)this controller is connected to internal backup devicesA. on-board SCSI-controller for accessible drives and SCSI-HDs1-channel Ultra 320 SCSI on-board controller; included as standard.Example for IME with 3 data devices:LSI Integrated Mirroring Enhanced (IME) is a RAID 1 implementation (no RAID 0 support). It can be operated also with an oddn u m b e r o f h a r d d i s k s ( m a x . o n e R A I D 1 S e t ) . T h e r e a r e , d e p e n d i n g o n s y s t e m , u p t o 6 h a r d d i s k s , i n c l u d i n g a h o t s p a r e d i s k ,possible. Supportet are only the 32-bit operating systems Windows2000/2003 as well as SuSE and RedHat Linux.All internal cables and adapters for the basic unit and for components are included.1x per <strong>TX150</strong><strong>S3</strong>T26139-Y3849-L1 Only SX10 Backup is released for the externalExternal on-board SCSI Interface connection of the on-board SCSI controllerCable and external and the 29160.connector interface (HD68) Cable sold separately not mounted in factory.occupies one connection panel Use this cable only if on-board controller is notmax. 1x per system for ext. used otherwise (eg. S26361-F2814-E6)GF u j i t s u S i e m e n s C o m p u t e r sEnterprise Products - <strong>PRIMERGY</strong> Server 1 2 o f 1 8
S y s t e m c o n f i g u r a t o r a n d o r d e r - i n f o r m a t i o n g u i d eG <strong>PRIMERGY</strong> <strong>TX150</strong> <strong>S3</strong> Status 2006-02-21B. SCSI controller for internal backup drivesS26361-F2399-E2SCSI Adapter U160Adaptec 291601 channel: LVD + Fast/ Ultra (decoupl.)max. 160MB/s; without cablePCI 64/66, min 180 mmPCI standard profileint: 50-pin or HD68-pinext:HD68-pinmax. 1x per systemS26361-F2814-E668-Pin Kit for accessible drivesCable with TerminatorTo connect acc. drives toseparate SCSI controllermax. 1x per systemC. SCSI controller for external drives and peripheral devicesS26361-F2399-E1 Only SX10 Backup is for externalSCSI U160 controller connection at the SCSI controller.Adaptec SCSI Card 291601 channel: LVD + Fast/ Ultra (decoupl.)LVD connect. for HD, without cableFast/Ultra connect. for acc. drives64/66 PCI, min 180 mmint: Fast 50 pol oder Ultra HD68+ LVD HD68; ext: HD68(LVD)S W :max. 1x per systemSection VIII Disk Arraym a x . 4 xD. LSI - Controller1-channel Ultra 320 SCSI on-board controller with LSI Integrated Mirroring (IME)Standard SCSI-cabling of a <strong>PRIMERGY</strong> <strong>TX150</strong> S2 basic unit with on-board controllerUltra 320 SCSI controller is connected to the internal hard disks and internal backup devices,if no additional HD/backup device controllers are configured.1x per <strong>PRIMERGY</strong> <strong>TX150</strong> S2D. zero-channel RAID controller (320-0x) for internal Disk Arrayand additional RAID controllers for internal / external Disk ArrayS26361-F3085-E1280-channel RAID controllerLSI Not for320-0x SATA variant!128MB SDRAM ECC CacheBBU optional Zero channel RAID controllerin combination with on-board LSI must be installed in theU320 SCSI controller blue marked bay.withoutcable64Bit/133MHz PCI-X controller With zero channel RAID controller3.3V power supply & signaling the IME function is no longermax. 1x per system available.tobecontinuedon next pageS26361-F3085-E10Cache Battery Backup Unitmax. 1x pro ControllerHF u j i t s u S i e m e n s C o m p u t e r sEnterprise Products - <strong>PRIMERGY</strong> Server 1 3 o f 1 8
S y s t e m c o n f i g u r a t o r a n d o r d e r - i n f o r m a t i o n g u i d eH <strong>PRIMERGY</strong> <strong>TX150</strong> <strong>S3</strong> Status 2006-02-21continuedon previous E. 2-Kanal Ultra 320 SCSI Controller für Disk ArraypageS26361-F3006-E128S26361-F3090-E2562-channel RAID Controller U320 2-channel RAID Controller U320LSILSI320-2 320-2x128MB SDRAM ECC Cache 256MB SDRAM ECC Cache Not for1 x default with TBBU default with TBBU SATA variant!plug: internal 2x HD68; plug: internal 2x HD68;external: 2x VHDCI external: 2x VHDCIwithout cable without cable64/66 PCI controller, 180mm 64/133 PCI-X controller, 180mm3.3V and 5V tolerant signaling 3.3V and 5V tolerant signalingmax. 1x per system max. 1x per systemThe fitting connection cables can be found in the configuratorof the external storage system and / or rack.S26361-F2814-E6 Backup drive and HDD should run on separate channels.68-Pin Kit for accessible drivesCable with TerminatorTo connect acc. drives to When internal HDD's at the RAID controller (not IME / ZCR)separate SCSI controller are operated, the SCSI cable S26361-F2814-E6 is to bemax. 1x per system configured for internal accessible drives.F. 4. Port SATA RAID 5 controller for Disk ArrayS26361-F3079-E128 With this option the Promise FastTrak 150TX (RAID 0/1/10)4 Port SATA RAID 5 Controller contained in the basic unit is replaced128MB SDRAM ECC Cache with the Promise Fast Trak 150SX (RAID 0/1/10/5).Plug: int. 4x SATA Not forPCI 32/66 SCSI variant!max. 1x per systemIF u j i t s u S i e m e n s C o m p u t e r sEnterprise Products - <strong>PRIMERGY</strong> Server 1 4 o f 1 8
System configurator and order-information guideI <strong>PRIMERGY</strong> <strong>TX150</strong> <strong>S3</strong> Status 2006-02-21Section IX Communication / NetworkGigabit Ethernet Contr. on-board The Intel LAN controllers 1000MT and 1000TX can be usedBroadcom with the on-board controller in Teaming Modeext: for RJ 45-connectorSW: AFT, VLAN, Fast ChannelS26361-F3053-E1S26361-F3142-E1Gigabit Ethernet Contr. 1000TX Gigabit Ethernet Contr. 1000TXEth. Ctrl 1x1Gbit PCI-X Pro/1000MT Cu Eth. Ctrl 1x1Gbit PCI32 PRO/1000GT CuIntel PRO/1000 MT Server Adapter Intel Pro/1000 GT AdapterAdapter Teaming Support PCI 32 (33/66MHz),PCI-X (PCI64/133), min 165 mm ext: for RJ45-plug, Cat 5ext: for RJ45-plug, Cat 5 connection with Cat 5 cablingconnection with Cat 5 cabling SW: VLAN, Fast & Gbit EtherchannelSW: VLAN, Fast & Gbit Etherchannel max. 4x per systemmax. 4x per system4xas soon as availableS26361-F3011-E1S26361-F3227-E1Gigabit Ethernet Contr dual 1000TX Gigabit Ethernet Contr dual 1000TXEth. Ctrl 2x1Gbit PCI-X PRO/1000MT Cu Eth. Ctrl 2x1Gbit PCI-X PRO/1000GT CuIntel Pro/1000MT dual Server Adapter Intel Pro/1000GT dual Server AdapterAdapter Teaming Support PCI-X (PCI64/133)PCI-X (PCI64/133), min 163 mm ext: for RJ45-plug, Cat 5ext: for RJ45-plug, Cat 5 max. 2x per systemconnection with Cat 5 cablingSW: VLAN, Fast & Gbit Etherchannelmax. 2x per systemS26361-F1809-E2ISDN S O Controller PCIEicon Diva Server BRI-2M 2.0Incl.S O -connectoroccu. short PCI slot min. 170 mmSO-Interfacemax. 2x per systemJFujitsu Siemens ComputersEnterprise Products - <strong>PRIMERGY</strong> Server 15 of 18
System configurator and order-information guideJ <strong>PRIMERGY</strong> <strong>TX150</strong> <strong>S3</strong> Status 2006-02-21Section X System management optionsS26361-F1790-E221S26361-F2425-E103RemoteView Software V5.0RSB S2 LP 3HUInstallation and configuration of RemoteView Service Board S2RemoteView Web and LAN FrontEnd Low Profile Version with 3 U bracketRSB, BMC-Manager, RTDS and FreeDOS for one standard PCI-slotOnline manuals incl. cables and RV SWmax. 1x per systemS26361-F2425-E305RSB S2 LP external power supplyRemoteView Service Board S2low profile external power supplyincluding power cablewith Euro- and Euro socket connectorSection XI MiscellaneousS26361-F1652-L4 In connection with rack configurationsModem external 56kbps (V.90) the install variant of the modemMultiTech (S26361-F1652-E4) has to be orderedMT5643ZBA-Global (see rack configurator)internationalapprovalincl. 2m Telephon cord RJ11/RJ11Adapter Plug RJ11/TAESerial Interface cable DB25m / DB9fAC-Adapter w. German Power Cordoccupies one COM portmax. 1x per systemKFujitsu Siemens ComputersEnterprise Products - <strong>PRIMERGY</strong> Server 16 of 18
System configurator and order-information guideK <strong>PRIMERGY</strong> <strong>TX150</strong> <strong>S3</strong> Status 2006-02-21Section XII Country specific / rack specific optionsA country specific power cord has to be ordered for all floorstand versions:- once per basic unit and an additional second cable- if an second hot plug, redundant power supply modul is ordered.<strong>PRIMERGY</strong> <strong>TX150</strong> <strong>S3</strong> Floorstand <strong>PRIMERGY</strong> <strong>TX150</strong> <strong>S3</strong> RackPower cord for following countries:1,8 m, grey Country specific power cords are notrequired for rack versions, except for USAT26139-Y1740-E10 D, A, B, F, NL, FIN, S, N, E, P, RUS, TR &Canada. Power cords are shipped in a rackmax. T26139-Y1742-E10 USA, Canada version with inlet connector for non-heating2 x T26139-Y1743-E10 Switzerland apparatus. (1x with Standard PSU,T26139-Y1744-E10 UK, Ireland 2x with hot plug upgrade)T26139-Y1745-E10ItalyT26139-Y1746-E10 Denmark T26139-Y1742-E10 USA, CanadaT26139-Y3850-E10 No power cord as order option For shipments to USA&Canada, you have to orderone power cord (1,8m, grey) per power supply.Attention: For connection of a monitorto the system an additional countryspecific power cord has to beordered as option.Power cord for optional monitor connection for the following countries:1.8m,greyT26139-Y1740-L10 D, A, B, F, NL, FIN, N, S, E, P, RUS, TRT26139-Y1742-L10 USA, CanadaT26139-Y1743-L10SwitzerlandT26139-Y1744-L10 U K , I RT26139-Y1745-L10ItalyT26139-Y1746-L10DenmarkPowercord 3-way splitter 1M to 3F0.78m,greyT26139-Y3692-L1Adapter for the connection of up to 3 PS-modules or up to2 PS-modules and one monitor to the mains connection.Both, standard and hot plug power supplies, are supported.Other options and PeripheralsFor other options refer to the section "Product-specific optionsThese options are supplied loose with the shipment.For suitable peripherals for this product refer to the section "Peripherals/communication".Option for Floorstandkeyboards for floorstand versions for following countries:S26381-K397-E110 USA / internationalS26381-K397-E120GermanyS26381-K397-E140FranceS26381-K397-E155 Sweden / FinlandS26381-K397-E165 United KingdomS26381-K397-E180SpainS26381-K397-E185ItalyEnd <strong>PRIMERGY</strong> <strong>TX150</strong> <strong>S3</strong>Fujitsu Siemens ComputersEnterprise Products - <strong>PRIMERGY</strong> Server 17 of 18
System configurator and order-information guide<strong>PRIMERGY</strong> <strong>TX150</strong> <strong>S3</strong> Status 2006-02-21Cange ReportDate Order number Changes2006-02-14 S26361-F3224-E3 Tape drive VXA-320 160GB, 12MB/s, U160 SCSI - now available2006-01-25 S26361-K980-V*32 Basic units with Celeron processor 2.8GHz/533MHz/256kB, memory 256MB - no longer available2006-01-25 S26361-K980-V*** Basic units with P 4 processor 3.2 and 3.6GHz/800MHz/1MB 256MB, memory 256MB - no longer available2005-12-15 S26361-F3227-E1 Gigabit Ethernet Controller dual 1000TX - as soon as available2005-12-12 S26361-F1790-E221 RemoteView Software V5.0 - now available2005-12-12 S26361-F1790-E220 RemoteView Software V4.0 - no longer available2005-11-23 S26361-F1809-E2 ISDN SO Controller PCI Eicon Diva Server BRI-2M 2.0 - now available2005-10-12 S26361-F3079-E10 Cache Battery Backup Unit - no longer available2005-07-26 S26361-F2839-E1 Gigabit Ethernet Contr. 1000TX, PCI 32 - no longer available2005-07-06 S26361-F2573-E3 Tape drive LTO Ultrium 100GB - no longer available2005-05-18 S26361-F3121-E514 Hard disk 146GB in 1" carrier U320 SCSI 15.000rpm - now available2005-04-25 S26361-F1790-E220 RemoteView Software V4.0 - now available2005-04-20 S26361-F3142-E1 Gigabit Ethernet Contr. 1000TX Intel Pro/1000 GT Adapter - now available2005-04-18 S26361-F3157-E3 Tape drive LTO2HH Ultrium 200GB 1.6 x 5.25" - now available2005-03-14 S26361-F3121-E136 HDD 36GB 10.000 rpm. - no longer available2005-03-10 S26361-F3148-E1 DVD-RW 16x super multi drive - now available2005-03-10 S26361-F3133-E1 DVD-RW DUAL/DL drive - no longer available2005-02-23 S26361-F3148-E1 DVD-RW 16x super multi drive - as soon as available2004-11-02 First ReleaseFujitsu Siemens ComputersEnterprise Products - <strong>PRIMERGY</strong> Server 18 of 18
Change language