CONCRETE CONSTRUCTION TABLE OF CONTENTS PAGE I ...

Polaris
Engineering
Standard
430.1
Rev.: 0
Page: 2 of 9
Date: 07/07/09
CONCRETE CONSTRUCTION
I. SCOPE
This Standard covers requirements for construction of concrete structures and
foundations.
Where conflicts exist between this Engineering Standard and other POLARIS
Engineering Standards and/or applicable codes or regulations, the more stringent
requirement shall govern. All conflicts shall be brought to Client and/or Polaris
Engineering’s attention for resolution. Client and/or Polaris Engineering shall be the sole
arbiter of any conflicts.
II.
REFERENCES
This POLARIS Standard is to be used in conjunction with the latest revision of the
standards and codes listed below, unless specifically noted. The terminology "latest
revision" shall be interpreted as the revision in effect at the time of contract award. This
POLARIS Standard may reference specific sections of some of these codes and
standards. The revision of the codes and standards being referenced is noted below in
parenthesis. This information is provided to identify the subject matter being referenced.
Changes or exceptions made to the referenced code or standard shall apply to later
revisions as applicable.
A. POLARIS Engineering Standards:
1. 410.1 Concrete Roads and Paving
2. 430.2 Concrete Materials and Testing
3. 430.3 Concrete Reinforcing
B. American Concrete Institute (ACI) Codes and Standards:
1. 117 Standard Tolerances For Concrete Construction and
Materials (1990)
2. 304R Guide for Measuring, Mixing, Transporting and Placing
Concrete (2000)
3. 305R Hot Weather Concreting (1999)
4. 318 Building Code Requirements for Structural Concrete
(1999)
5. 325.9R Guide for Construction of Concrete Pavements and
Concrete Bases (1991)