Maintenance and Repair - International Paint Protective Coatings

Maintenance 

and Repair 

Coating products and services 

for cost effective asset management

Meeting the Needs of the 

Maintenance Engineer 

International Paint - global supply, local service 

Our business is built 

around yours. With 

our global supply 

chain and technical 

service network, your 

asset will remain 

protected wherever 

you are, whatever 

the environment. 

Why protect your asset 

Whatever the substrate - steel or concrete - your asset is subject to 

corrosion. Steel is at risk from the corrosive environment in which it is 

situated or from the various micro-environments caused by the operation 

of your plant. Concrete is no different, it can absorb water, chlorides 

and other chemicals created by processes which, in time, will affect its 

integrity. Coating systems protect your asset and, when coupled with 

a comprehensive maintenance schedule, help ensure a reliable 

performance at an optimal level with minimal downtime. 

A coating system is only as good as the 

surface it’s applied to 

Many areas of a production facility operate continuously with limited 

shutdown maintenance periods meaning routine maintenance has to 

be carried out alongside live operational plant. 

Gritblasted surfaces are not always practical and other methods of 

surface preparation, ranging from a simple hand-chip, scrape or wire 

brush method to power tool cleaning or even water jetting are preferred. 

Similarly spray application is not always possible or cost-effective when 

adding the cost of specialist containment therefore application by brush, 

roller and trowel must also be considered. 

We have a range of coatings and linings suitable for application over all 

standards of surface preparation using various application methods.

Our product offer 

Structural Steel, Splash Zone & Tidal Zone Areas 

Production processes create micro-climates 

within a facility, such as wet/dry areas and 

vapour affected zones, which can cause 

premature failure of a coating system. 

We have a range of products suitable for all 

conditions ranging from surface tolerant and 

chemical resistant epoxy primers to a range 

of durable finishes. 

Our Interplus products are surface tolerant, 

temperature resistant to 150ºC (302ºF) and can 

be applied over hand tool prepared steel. 

Interseal 670HS allows low temperature 

cure (-5ºC/23ºF), can be applied to hand tool 

prepared areas and a range of aged coatings, 

is suitable for immersion and for use in drinking 

water tanks. 

Our finishes offer covers durable polyurethanes 

like Interthane 990 and the user-friendly 

single pack polysiloxane Interfine 1080 that 

delivers excellent gloss and colour retention. 

In Interzone 954 we have one of the world’s 

leading all round maintenance coatings. 

Interzone 954’s epoxy technology provides: 

• Excellent abrasion resistance 

• High build in a single coat 

• Wide surface tolerance 

• Early water resistance 

• Resistance to a wide range of chemicals 

These properties make Interzone 954 ideal for 

a range of applications including: 

• Pitted structural steel 

• Splash zone and tidal zone areas 

• Light duty and heavy duty decks 

• Slurry tanks in the mining industry 

Passive Fire Protection 

Whether the fire risk is cellulosic or hydrocarbon, 

we have a solution to meet your requirements. 

Our Chartek epoxy intumescent products offer: 

• Hydrocarbon pool and jet fire protection 

• 100% volume solids 

• Easy installation 

• Long term protection against corrosion under 

fire-proofing (CUF) 

• Low installed weight 

• Excellent mechanical integrity 

Our Interchar acrylic and epoxy intumescent 

products offer: 

• Cellulosic fire protection 

• Excellent aesthetics 

• Competitive loadings 

• Excellent external durability 

• Enhanced mechanical properties 

• Water and solvent-borne technologies 

Temperature Resistant Coatings 

Temperature resistance and protection against 

corrosion under insulation (CUI) are major 

requirements for industrial facilities. 

Our Intertherm range of high heat products 

(Intertherm 228, Intertherm 751CSA and 

Intertherm 50) provide the following benefits: 

• Temperature resistance to 540°C (750°F) 

• Excellent CUI protection 

• Temperature cycling resistance 

• Thermal shock resistance 

• Application to hot steel up to 120°C (248°F) 

• Single coat application

Interplan 

A risk based inspection program carried out by our specialist 

team of surveyors, which provides a documented and site 

specific condition survey, designed to provide the maintenance 

engineer with all the information required to understand: 

What needs to be repaired 

Condition survey and specific surface area 

How to repair it 

Customised surface preparation and coating repair specification 

systems for differing situations and locations 

In which order 

A detailed year on year prioritised maintenance schedule 

What is it going to cost 

As you will know the maintenance priorities for each year, 

you can then plan and budget correctly using our Interplan 

document as part of the process 

Types of Interplan Surveys available: 

• Corrosion 

• Fire Protection 

• Concrete & Secondary Containment 

• Planned Maintenance from New Construction 

• Coating Aesthetics

Our product offer 

Concrete Protection 

Concrete is used extensively in a 

variety of industries including oil, 

gas and chemical processing, 

mining, water and wastewater, 

power generation and infrastructure. 

It has its own unique mode of 

failure - cracking and spalling, 

chemical attack (carbonation) 

and wear, all of which can lead 

to corrosion of the rebar and 

reduced structural integrity. 

We have a wide range of coatings 

to cover all your concrete 

protection needs including: 

• Ceilcote novolac vinyl 

esters and vinyl esters for 

protection against agressive 

chemicals and crack bridging. 

• Polibrid solvent free 

elastomeric urethane for 

excellent abrasion resistance. 

• Intercrete cementitious 

materials for repair and remediation. 

Linings 

Providing resistance to aggressive 

chemicals or high service 

temperatures we have a range 

of linings to suit your needs. 

Our Interline range of 

epoxy and epoxy phenolic 

linings can be used for: 

• Tank bottom refurbishment 

when used with glass 

fibre laminate systems 

• Potable water 

• Crude oil and hydrocarbon 

cargoes 

Our Enviroline range of 

polycylamine cured epoxy 

novolacs deliver: 

• Fast return to service 

• High temperature cargo protection 

• Single coat application 

• Low temperature cure 

• Outstanding abrasion tolerance 

The Ceilcote brand uses 

vinyl ester and novolac vinyl 

ester chemistry to offer: 

• Protection against aggressive 

chemicals such as sulphuric 

and hydrofluoric acids 

• Reinforced systems 

Technical Support 

As much as 95% of all coatings 

failures are a result of poor surface 

preparation and application. 

Good surface preparation and 

correct application are essential 

to achieve long term cost 

effective coating systems. 

We can provide: 

• NACE or FROSIO 

qualified technical service 

representatives for round the 

clock technical support 

• Customised coating application 

training for contractors 

• Coating schemes to meet 

local regulations 

• Product supply flexibility

Global Organisation with Local Service 

WORLD CENTRE 

Tel: +44 20 7932 9900 

Fax: +44 20 7932 9932 

Argentina 

Buenos Aires 

Tel: +54 3327 44 7777 

Fax: +54 3327 44 7738 

Australia 

Brisbane 

Tel: +61 7 3892 8888 

Fax: +61 7 3892 4287 

Austria 

Elixhausen 

Tel: +43 662 4898 924 

Fax: +43 662 4898 999 

Bahrain 

Manama 

Tel: +973 17 727 091 

Fax: +973 17 725 473 

Belgium 

Vilvoorde 

Tel: +32 3 644 0066 

Fax: +32 3 644 0006 

Brazil 

Rio de Janeiro 

Tel: +55 21 2199 7100 

Fax: +55 21 2199 7123 

Bulgaria 

Varna 

Tel: +359 52 60 1696 

Fax: +359 52 60 1697 

Canada 

Dorval 

Tel: +1 514 631 7260 

Fax: +1 514 631 8058 

Chile 

Viña del Mar 

Tel: +56 32 267 1174 

Fax: +56 32 263 1496 

China 

Shanghai 

Tel: +86 21 2320 0088 

Fax: +86 21 2320 0188 

Croatia 

Split 

Tel: +385 21 315 276 

Fax: +385 21 392 248 

Cyprus 

Limassol 

Tel: +357 25 341847 

Fax: +357 25 372075 

Denmark 

Hedehusene 

Tel: +45 70 251 718 

Fax: +45 70 251 719 

Egypt 

Orman 

Tel: +20 2 748 7496 

Fax: +20 2 748 1116 

Fiji 

Suva 

Tel: +679 330 4100 

Fax: +679 330 3007 

France 

Le Havre 

Tel: +33 2 35 22 13 50 

Fax: +33 2 35 22 13 52 

Germany 

Hamburg 

Tel: +49 40 720 030 

Fax: +49 40 720 8953 

Greece 

Athens 

Tel: +30 210 429 5140 

Fax: +30 210 429 5149 

Hong Kong 

North Point 

Tel: +852 25 08 7700 

Fax: +852 28 27 9488 

India 

Bangalore 

Tel: +91 80 2289 5000 

Fax: +91 80 2289 5500 

Indonesia 

Bekasi 

Tel: +62 21 893 4270 

Fax: +62 21 893 4275 

Irish Republic 

Dublin 

Tel: +353 188 29160 

Fax: +353 188 29161 

Italy 

Genova 

Tel: +39 10 6595 71 

Fax: +39 10 6595 759 

Japan 

Kobe 

Tel: +81 78 321 6871 

Fax: +81 78 321 6870 

Jordan 

Tel: +965 474 1013 

Fax: +965 474 1063 

Korea 

Busan 

Tel: +82 51 580 6111 

Fax: +82 51 668 7880 

Kuwait 

Kheitan 

Tel: +965 474 1013 

Fax: +965 474 1063 

Malaysia 

Johor 

Tel: +60 7 254 1121 

Fax: +60 7 251 4775 

Mexico 

Toluca 

Tel: +52 722 273 2277 

Fax: +52 722 273 2278 

Morocco 

Casablanca 

Tel: +212 522 678 767 

Fax: +212 522 663 187 

Netherlands 

Rhoon 

Tel: +31 10 503 3500 

Fax: +31 10 501 4459 

New Zealand 

Christchurch 

Tel: +64 3 381 5353 

Fax: +64 3 381 5354 

Norway 

Kolbotn 

Tel: +47 80 01 84 60 

Fax: +47 80 01 84 61 

Oman 

Muscat 

Tel: +968 244 91 244 

Fax: +968 244 91 478 

Panama 

Panama City 

Tel: +507 229 62 05 

Fax: +507 229 63 12 

Papua New Guinea 

Port Moresby 

Tel: +675 276 3034/36 

Fax: +675 276 3035/37 

Poland 

Gdansk 

Tel: +48 58 732 02 78 

Fax: +48 58 732 02 77 

Portugal 

Azeitao 

Tel: +351 21 219 9100 

Fax: +352 21 219 9129 

Qatar 

Doha 

Tel: +974 44726913 

Fax +974 44726968 

Russia 

Moscow 

Tel: +7 495 960 2890 

Fax: +7 495 960 2971 

Saudi Arabia 

Dammam 

Tel: +966 3 812 1044 

Fax: +966 3 812 1169 

South Africa 

Cape Town 

Tel: +27 31 451 3269 

Fax: +27 31 462 9944 

Spain 

Barcelona 

Tel: +34 93 545 00 00 

Fax: +34 93 545 00 01 

Sri Lanka 

Colombo 

Tel: +94 11 5859942 

Fax: +94 11 5359943 

Sweden 

Angered 

Tel: +46 31 928500 

Fax: +46 31 928530 

Syria 

Tel: +965 474 1013 

Fax: +965 474 1063 

Taiwan 

Kaohsiung City 

Tel: +886 7 787 3959 

Fax: +886 7 787 3953 

Thailand 

Bangkok 

Tel: +66 2 744 1299 

Fax: +66 2 744 1298 

Turkey 

Istanbul 

Tel: +90 216 445 44 40 

Fax: +90 216 445 45 02 

Ukraine 

Odessa 

Tel: +380 482 346 308 

Fax: +380 482 346 307 

United Arab Emirates 

Dubai 

Tel: +9712 43472491 

Fax +9712 43472339 

United Kingdom 

Gateshead 

Tel: +44 191 469 6111 

Fax: +44 191 438 3711 

United States of America 

Houston 

Tel: +1 713 682 1711 

Fax: +1 713 682 0065 

Venezuela 

Maracaibo 

Tel: +58 261 765 0974 

Fax: +58 261 765 4911 

West Africa 

Port Harcourt 

Tel: +234 1740 4044 

Yemen 

Tel: +966 3 812 1044 

Fax: +966 3 812 1169 

www.international-pc.com 

pc.communication@akzonobel.com 

and and all product names mentioned in this publication are trademarks of, or licensed to, AkzoNobel. © AKZONOBEL 2012. 

International Paint has used its best endeavours to ensure that the information contained in this publication is correct at the time of printing. 

Please contact your local International Paint representative if you have any questions. 

Unless otherwise agreed by us in writing, any contact to purchase products referred to in this brochure and any advice which we give in connection with 

the supply of products are subject to our standard conditions of sale and the provisions of the relevant product data sheet. 

AN02801_141209 

G6_M&RMR_UK 

07/12

Maintenance and Repair - International Paint Protective Coatings

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?