slimline 60 / superslider 100 pivot system - Eboss

slimline 60 / superslider 100
pivot system
// 60 SLIMLINE & 100 SUPERSLIDER LOUVRE
NEW 2009 LOUVRETEC SLIMLINE & SUPERSLIDER PIVOT SYSTEM
// Both the Slimline 60 & Superslider 100 pivot
system have been designed to operate as a
new sliding door system.
// Refer to section 9 for details on full sliding
system.
60 SLIMLINE LOUVRE
// Remove the wheels, guides, top & bottom
tracks and both systems can be used as a
stationary easy to operate adjustable louvre
system.
// Ideal where fi xed panels are used alongside
sliding panels, or simply as stand alone
panels only.
// The pivot system is identical for both louvres,
using a state of the art internal geared rack &
pinion drive hidden within the frame.
// There is no external mechanism ensuring
clean uncluttered lines.
// This is further enhanced as the louvre
blades do not protrude beyond the width of
the frame.
// This gives a total clear operating width of
60mm for the Slimline & 100mm for the
Superslider.
100 SUPERSLIDER
LOUVRE
7.37
PRODUCT CATALOGUE 2009 © LOUVRETEC ® GROUP
// technical specification subject to change without notice

LOUVRETEC SLIMLINE 60 /
SUPERSLIDER 100 PIVOT SYSTEM
// HOW THE SYSTEMS WORK
60mm SLIMLINE / 100mm SUPERSLIDER LOUVRE
1 2
1 INTERNAL PIVOT SYSTEM
Both systems are designed around an outer
frame that houses an internal geared rack
and pinion pivot system.
2 SLIMLINE 60
The blades fi t within the frame – Slimline 60
equals total width of 60mm
3 SUPERSLIDER 100
Superslider 100 equals total width of 100mm
3 4
4 CLOSE ON WOOLPILE
Adjust by simply opening and closing the
blades. Each blade closes upon a woolpile
strip ensuring a snug rattle free fi t.
5 SLIDELOCK
An internally fi tting Slidelock secures the
panels either fully closed or in fi ve fi xed
positions.
6 LOUVRE ADJUSTMENT
An optional Louvre Adjustment Dial is
available. Ideal when including insect mesh or
s/s security mesh to the door frame.
5 6
PRODUCT CATALOGUE 2009 © LOUVRETEC ® GROUP
// technical specification subject to change without notice
7.38

TECHNICAL DETAILS // SLIMLINE 60 / SUPERSLIDER 100 PIVOT SYSTEM
CROSS SECTION
// SUPERSLIDER 100
The 95mm Blade fi ts within the
outer frame.
An internal geared rack and pinion
pivot provides for easy fi nger tip
operation.
SUPERSLIDER 100 PANEL
TYPICAL INSTALLATION
// SLIMLINE 60
The 58mm Blade also fi ts within the
outer frame and uses the same pivot
system as the Superslider 100 .
SLIMLINE 60 PANEL FIXED
WITHIN OPENING
7.39
PRODUCT CATALOGUE 2009 © LOUVRETEC ® GROUP
// technical specification subject to change without notice