Cladding Systems - Eboss

smarttray cladding systemsCladding SystemsSmart tray 305 standing seam snap-lockintroductionThe smart tray 305 snap-lock profile is suitable for most wall cladding projects.With its unique profile, it is particularly suited to accomodate curved designs with amaximum formed width of 305mm. (concave and convex shapes)alternative solutionAll smart tray standing seam tray products are considered alternative solutions underthe current building code. Please consult Architectural Metalformers who will assistyou with the relevant required technical information to succesfully specify the product.product overviewsmart tray 305 snap-lock cladding panels are formed to the exact measurementsrequired and installed over a solid plywood base with approved roofing underlay.materialminimum pitchlengthwidthCopper, zinc, aluminium and Colorcote Zincalume N/A for claddingRoll formed continuous lengths305mm effective coverthickness Copper 0.5mm, 0.55mm, 0.6mm, 0.7mmZincAluminium ARX0.7mm, 1.0mm0.7mm, 0.9mmColorcote Zincalume ZRX 0.55mmZR80.55mmupstand height23.5mm© Architectural Metalformers

smarttray cladding systems> applicationsmart tray 305 snap-lock profile is suitable for most commercial and residentialcladding projects.Can be applied to:> Traditional vertical and horizontal wall cladding> Curved walls - convex and concave> design considerationsWhen you are specifying smart tray 305 snap-lock cladding, consideration should begiven to the following:> Material type> Wall design and orienation> Position of doors and windows> Radius of any curved walls> Wind loading> Environmental factors, urban, rural or coastal> availabilityCopper coil for smart tray 305 snap-lock cladding is usually a stock item.Zinc, aluminium, and Colorcote Zincalume are subject to supplier lead times.Please consult with Architectural Metalformers as early as possible in the designprocess regarding your cladding requirements.> flashing detailsRobust flashing design, manufacture and installation are the key to a total waterproofsolution. All these crucial steps are controlled and overseen in-house.We use flashing methodologies that are well proven in Europe and the USA for hundredsof years and our flashings comply and often surpass E2 regulations.> plywood substrateAll smart tray 305 snap-lock cladding requires a solid plywood substrate. We recommenda minimum of 15mm H3 treated plywood be installed.please refer to the installation category in the main menu for a thorough plywoodinstallation specification.For all torch on compatability requirements please refer to www.ecoply.co.nz© Architectural Metalformers

smarttray cladding systems> underlay and fixingsWe install underlay between the plywood substrate and our smart tray 305 snap-lockpanels. The paper is fixed using 12mm stainless steel staplessmart tray 305 snap-lock tray panels are snap-locked together with the ribs interlockingwithout the use of clips or a locked seam. The panels are fixed through the expansionslots with stainless steel screws at 500mm centres which are concealed by the nextpanel.> thermal expansion and contractionTo allow for thermal movement, our smart tray 305 snap-lock cladding panels are fixedthrough an expansion slot.This allows for expansion and contraction without the associated “oil canning” as seenin some tray roofs.The following is the expansion rate of various metals over a 70°C temperature change fora 10m length of product.CopperZincAluminiumZincalume 11.9mm15.4mm14.8mm7.7mm© Architectural Metalformers

smart tray cladding systemssmart tray snap-lock cladding - horizontal cladding with matching smartrain rainwater goods - copper© Architectural Metalformers

smart tray cladding systemssmart tray snap-lock cladding - wrapped diagonal curved cladding in copper© Architectural Metalformers