8.02 sun louvre systems end fixed - Eboss
8.02 sun louvre systems end fixed - Eboss
8.02 sun louvre systems end fixed - Eboss
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>sun</strong> <strong>louvre</strong> <strong>systems</strong> <strong>end</strong> <strong>fixed</strong><br />
// THE FOLLOWING SUN LOUVRES CAN BE END FIXED AT ANY PITCH OR ANY CENTRE.<br />
END FIXED 40mm MINI LOUVRE<br />
// Weight per lineal metre _______ 0.365 kgm<br />
// Blade Dimensions ____________ 42 x 8mm<br />
// Spans horizontal - Roof or Wall<br />
Max low wind _______________ 1350<br />
Max very high wind __________ 1000<br />
// Spans vertical - Wall<br />
Max low wind _______________ 1350<br />
Max very high wind __________ 1000<br />
40 MINI LOUVRE<br />
Pages 8.06, 8.07<br />
END FIXED 70mm MINI LOUVRE<br />
// Weight per lineal metre _______ 0.716 kgm<br />
// Blade Dimensions ____________ 74 x 13mm<br />
// Spans horizontal - Roof or Wall<br />
Max low wind _______________ 1900<br />
Max very high wind __________ 1400<br />
// Spans vertical - Wall<br />
Max low wind _______________ 2150<br />
Max very high wind __________ 1600<br />
70 MINI LOUVRE<br />
Page 8.09<br />
END FIXED 90mm MIDI LOUVRE<br />
// Weight per lineal metre _______ 0.75 kgm<br />
// Blade Dimensions ____________ 90 x 16mm<br />
// Spans horizontal - Roof or Wall<br />
Max low wind _______________ 2000<br />
Max very high wind __________ 1500<br />
// Spans vertical - Wall<br />
Max low wind _______________ 2300<br />
Max very high wind __________ 1750<br />
90 MIDI LOUVRE<br />
Pages 8.08, 8.09<br />
END FIXED 150mm MIDI LOUVRE<br />
// Weight per lineal metre _______ 1.47 kgm<br />
// Blade Dimensions ____________ 150 x 20mm<br />
// Spans horizontal - Roof or Wall<br />
Max low wind _______________ 2750<br />
Max very high wind __________ 2000<br />
// Spans vertical - Wall<br />
Max low wind _______________ 3150<br />
Max very high wind __________ 2350<br />
150 MIDI LOUVRE<br />
Pages 8.08, 8.09<br />
<strong>8.02</strong><br />
PRODUCT CATALOGUE 2009 © LOUVRETEC ® GROUP<br />
// technical specification subject to change without notice
<strong>sun</strong> <strong>louvre</strong> <strong>systems</strong> <strong>end</strong> <strong>fixed</strong><br />
// THE FOLLOWING SUN LOUVRES CAN BE END FIXED AT ANY PITCH OR ANY CENTRE.<br />
120 AIRFOIL LOUVRE<br />
Pages 8.10, 8.11<br />
END FIXED 120mm AIRFOIL LOUVRE<br />
// Weight per lineal metre ________ 1.3 kgm<br />
// Blade Dimensions _____________ 120 x 14mm<br />
// Spans horizontal - Roof or Wall<br />
Max low wind ________________ 2300<br />
Max very high wind ___________ 1700<br />
// Spans vertical - Wall<br />
Max low wind ________________ 2650<br />
Max very high wind ___________ 1950<br />
180 AIRFOIL LOUVRE<br />
Pages 8.10, 8.12<br />
END FIXED 180mm AIRFOIL LOUVRE<br />
// Weight per lineal metre ________ 1.85 kgm<br />
// Blade Dimensions _____________ 180 x 20mm<br />
// Spans horizontal - Roof or Wall<br />
Max low wind ________________ 2950<br />
Max very high wind ___________ 2200<br />
// Spans vertical - Wall<br />
Max low wind ________________ 3400<br />
Max very high wind ___________ 2550<br />
125 LOUVRELINE<br />
WEATHERBOARD<br />
Pages 8.13, 8.14<br />
END FIXED 125mm LOUVRELINE<br />
WEATHERBOARD<br />
// Weight per lineal metre _______ 1.33 kgm<br />
// Blade Dimensions ____________ 125 x 17mm<br />
// Spans horizontal - Roof or Wall<br />
Max low wind _______________ 2500<br />
Max very high wind ___________ 1900<br />
// Spans vertical - Wall<br />
Max low wind _______________ 2900<br />
Max very high wind ___________ 2300<br />
180 LOUVRELINE<br />
WEATHERBOARD<br />
Pages 8.13, 8.14<br />
END FIXED 180mm LOUVRELINE<br />
WEATHERBOARD<br />
// Weight per lineal metre ________ 2.12 kgm<br />
// Blade Dimensions _____________ 180 x 22mm<br />
// Spans horizontal - Roof or Wall<br />
Max low wind ________________ 3050<br />
Max very high wind ___________ 2300<br />
// Spans vertical - Wall<br />
Max low wind ________________ 3500<br />
Max very high wind ___________ 2650<br />
PRODUCT CATALOGUE 2009 © LOUVRETEC ® GROUP<br />
// technical specification subject to change without notice<br />
8.03
<strong>sun</strong> <strong>louvre</strong> <strong>systems</strong> <strong>end</strong> <strong>fixed</strong><br />
// THE FOLLOWING SUN LOUVRES CAN BE END FIXED AT ANY PITCH OR ANY CENTRE.<br />
END FIXED 200mm MAXI LOUVRE<br />
// Weight per lineal metre ________ 0.365 kgm<br />
// Blade Dimensions _____________ 200 x 27mm<br />
// Spans horizontal - Roof or Wall<br />
Max low wind ________________ 3700<br />
Max very high wind ___________ 2600<br />
// Spans vertical - Wall<br />
Max low wind ________________ 4450<br />
Max very high wind ___________ 3100<br />
200 MAXI LOUVRE<br />
Pages 8.15, 8.16<br />
END FIXED 300mm MAXI LOUVRE<br />
// Weight per lineal metre ________ 5.66 kgm<br />
// Blade Dimensions _____________ 300 x 40mm<br />
// Spans horizontal - Roof or Wall<br />
Max low wind ________________ 4800<br />
Max very high wind ___________ 3700<br />
// Spans vertical - Wall<br />
Max low wind ________________ 6400<br />
Max very high wind ___________ 4400<br />
300 MAXI LOUVRE<br />
Pages 8.15, 8.17<br />
END FIXED 600mm MAXI LOUVRE<br />
// Weight per lineal metre ________ 14.74 kgm<br />
// Blade Dimensions _____________ 600 x 78mm<br />
// Spans horizontal - Roof or Wall<br />
Max low wind ________________ 6500<br />
Max very high wind ___________ 4100<br />
// Spans vertical - Wall<br />
Max low wind ________________ 7450<br />
Max very high wind ___________ 5000<br />
600 MAXI LOUVRE<br />
Pages 8.18, 8.19<br />
8.04<br />
PRODUCT CATALOGUE 2009 © LOUVRETEC ® GROUP<br />
// technical specification subject to change without notice
LOUVRETEC END FIXED SUN LOUVRES<br />
// HOW THE HORIZONTAL (OVERHEAD) SYSTEM WORKS<br />
END FIXED TO FLAT ALUMINIUM ONTO "T" SECTION<br />
OR PFC (FLAT SIDE OF "T" UP OR DOWN)<br />
// Refer to bullet points opposite in page 8.26<br />
re vertical End Fixed <strong>louvre</strong> blades. These also<br />
apply to Horizontal panels.<br />
// Horizontal or overhead <strong>louvre</strong>s may fi t within<br />
an existing opening or, as illustrated, may<br />
require a separate structural<br />
sub frame.<br />
PFC<br />
// Sub frames are typically aluminium or steel, and<br />
usually require specifi c engineering details.<br />
TEE SECTION<br />
END FIXED TO CHANNEL ON EXISTING<br />
STEEL FRAME OR SIMILAR<br />
// Engineering is usually also required for the<br />
fi xing details to the building. Refer pages 8.52<br />
- 8.54 for typical fi xing details.<br />
// Louvretec specialises in the supply and<br />
installation of aluminium structured sub frames.<br />
Please contact for<br />
further details.<br />
// Refer “Design for the Sun” pages 3.01-3.06 for<br />
further information.<br />
END FIXED TO CHANNEL ONTO BOX SECTION<br />
// All Louvre Panels shown can be joined to<br />
create one continuous panel.<br />
PRODUCT CATALOGUE 2009 © LOUVRETEC ® GROUP<br />
// technical specification subject to change without notice<br />
8.20
TECHNICAL DETAILS // 70 MINI & 90 MIDI LOUVRE - END FIXED OVERHEAD<br />
70mm MINI LOUVRE END FIXED HORIZONTAL OVERHEAD<br />
// HORIZONTAL PANEL<br />
// End fi xed 70mm Mini Louvre.<br />
// Blade pitch to suit<br />
// Blade centres to suit<br />
// Blades shown at 45° pitch<br />
x 120mm centres<br />
All Louvre Panels can be joined to create one continuous panel.<br />
90mm MIDI LOUVRE END FIXED HORIZONTAL OVERHEAD<br />
// HORIZONTAL PANEL<br />
// End fi xed 90mm Midi Louvre.<br />
// Blade pitch to suit<br />
// Blade centres to suit<br />
// Blades shown at 45° pitch<br />
x 120mm centres<br />
8.21<br />
PRODUCT CATALOGUE 2009 © LOUVRETEC ® GROUP<br />
// technical specification subject to change without notice
TECHNICAL DETAILS // 120 & 180 AIRFOIL LOUVRES - END FIXED OVERHEAD<br />
120mm AIRFOIL END FIXED HORIZONTAL OVERHEAD<br />
// HORIZONTAL PANEL<br />
// End fi xed 120mm Airfoil.<br />
// Blade pitch to suit<br />
// Blade centres to suit<br />
// Blades shown at 45° pitch<br />
x 120mm centres<br />
180mm AIRFOIL END FIXED HORIZONTAL OVERHEAD<br />
// HORIZONTAL PANEL<br />
// End fi xed 180mm Airfoil.<br />
// Blade pitch to suit<br />
// Blade centres to suit<br />
// Blades shown at 45° pitch<br />
x 120mm centres<br />
PRODUCT CATALOGUE 2009 © LOUVRETEC ® GROUP<br />
// technical specification subject to change without notice<br />
8.22
TECHNICAL DETAILS // 200 & 300 MAXI LOUVRES - END FIXED<br />
200mm MAXI LOUVRE END FIXED HORIZONTAL OVERHEAD<br />
// HORIZONTAL PANEL<br />
// End fi xed 200mm Maxi Louvre.<br />
// Blade pitch to suit<br />
// Blade centres to suit<br />
// Blades shown at 45° pitch x 120mm centres<br />
300mm MAXI LOUVRES END FIXED WITHIN STEEL PFC<br />
// HORIZONTAL PANEL<br />
// End fi xed 300mm Maxi Louvre.<br />
// Blade pitch to suit<br />
// Blade centres to suit<br />
// Blades shown at 45° pitch x 120mm centres<br />
8.23<br />
PRODUCT CATALOGUE 2009 © LOUVRETEC ® GROUP<br />
// technical specification subject to change without notice
LOUVRETEC END FIXED SUN LOUVRES<br />
// HOW THE SYSTEM WORKS<br />
BLADES CAN BE SET TO ANY PITCH OR<br />
CENTRE. THREE TYPICAL OPTIONS SHOWN:<br />
// All Louvretec Sun Louvres have internal screw<br />
fi xing ports.<br />
This enables blades to be:<br />
- Set at any angle or pitch (blade pitch)<br />
- Set at any centre (blade centre)<br />
// As a rule of thumb, blade centres are fi xed at<br />
between 75% - 100% of their width.<br />
Example: 180mm Airfoil would have a centre<br />
between 135mm – 180mm.<br />
// Blade pitch is an equally important<br />
consideration in determining the degree of<br />
light, shade, privacy and shelter. Refer “Design<br />
for the Sun” pages 3.1 -3.4 or discuss with<br />
Louvretec.<br />
PRODUCT CATALOGUE 2009 © LOUVRETEC ® GROUP<br />
// technical specification subject to change without notice<br />
8.05
TECHNICAL DETAILS // 40 MINI LOUVRE - END FIXED<br />
40mm MINI LOUVRE END FIXED<br />
// DIRECT TO OPENING<br />
NO END CAPS<br />
// 40mm <strong>louvre</strong> prepunched<br />
channel<br />
OPTION SHOW LOUVRES<br />
SCREW FIXED TO CHANNEL<br />
Refer page 6.06 For prepunched<br />
fi xing channel option<br />
// Typical Wardrobe doors<br />
70mm MINI LOUVRE END FIXED<br />
// DIRECT TO OPENING<br />
NO END CAPS<br />
// 70mm <strong>louvre</strong> <strong>end</strong> fi xed<br />
within frame. No <strong>end</strong><br />
caps required<br />
PRE DRILLED SIDE FIXING<br />
CHANNEL<br />
// Angle of <strong>louvre</strong><br />
restricted by frame<br />
width<br />
// Set at any centre<br />
Refer page 6.14 Typical Detail<br />
8.06<br />
PRODUCT CATALOGUE 2009 © LOUVRETEC ® GROUP<br />
// technical specification subject to change without notice
Change language