CPU Module Installation Guide - Dynojet Research
CPU Module Installation Guide - Dynojet Research
CPU Module Installation Guide - Dynojet Research
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>CPU</strong> MODULE INSTALLATION<br />
<strong>Installation</strong><br />
4 Remove the cable ducts from each side of the <strong>CPU</strong> module.<br />
5 Firmly hold the stack base with one hand and carefully lift the top three modules<br />
up, as straight as possible.<br />
remove top modules<br />
cable duct<br />
Figure 1-3: Remove Cable Ducts And Top <strong>Module</strong>s<br />
6 Using a 5/64-inch allen wrench, remove the four black button-head screws (two<br />
on each side) from the stack base.<br />
7 Remove the <strong>CPU</strong> module from the stack base.<br />
button head screws<br />
Figure 1-4: Remove <strong>CPU</strong> <strong>Module</strong> From Stack Base<br />
8 Tilt the <strong>CPU</strong> module allowing the four nuts (two on each side) to slide from the<br />
module.<br />
nuts<br />
Figure 1-5: Remove Nuts From <strong>CPU</strong> <strong>Module</strong><br />
<strong>CPU</strong> <strong>Module</strong> <strong>Installation</strong> <strong>Guide</strong><br />
1-3