The Juice & Blend - Breville

JUICE EXTRACTOR TROUBLESHOOTING
Problem
Juice Extractor will not
work or suddenly switches
off during juicing
Easy Solution
• Check that the power plug is securely inserted into
wall outlet.
• Insert the power plug into an independent outlet.
• Insert the power plug into a different outlet.
• Reset the circuit breaker if necessary.
• Ensure the Safety Locking Arm is in the upright
position and is securely locked into the two grooves
on either side of the Juicer Cover (see page 12).
• The Overload Protection may have automatically
de-activated the motor. Unplug the power cord from
the wall outlet and press the OVERLOAD RESET
button found on the underside of the Motor Base.
This will reset the Overload Protection, enabling you
to reconnect the power cord to the wall outlet and
recommence normal use (see page 16).
• The Overheat Protection may have automatically
de-activated the motor. Unplug the power cord from
the wall outlet and allow the appliance to cool for at
least 15 minutes. Insufficient cooling time may result
in the motor de-activating again. After sufficient
cooling time, reconnect the power cord to the wall
outlet and recommence normal use (see page 16).
• The Electronic Protection may have automatically
de-activated the motor. Unplug the power cord from
the wall outlet and clear the Feed Chute. Either too
much food is being processed at one time or the
pieces are not small enough. Try trimming food,
cutting food into smaller pieces of even size and/
or processing a smaller amount per batch. Then
reconnect the power cord to the wall outlet and
recommence normal use (see page 16).
23