Using Geomatica Software - Fernerkundung Jena - Friedrich ...

MODEL
ARI
Modelling environment (can be used instead of EASI)
Atmospheric Correction / Biosphere parameter modelling:
ATCOR0
ATCOR1
ATCOR2
ATCOR3
ATCOR2_T
ATCOR3_T
LAI
SAVI
FPAR
(obsolete v.6)
(obsolete v.6)
Atmosheric correction for flat areas, calculates an atmospheric
correction for flat areas applying constant or varying atmosphere.
Atmospheric correction and topographic normalisation, calculates a
ground reflectance image using elevation data.
Calculation of surface temperature for flat area
Calculation of surface temperature using elevation data
Leaf Area Index model, calculates an Leaf Area Index model value.
Soil Adjust Vegetation Index, calculates a Soil Adjusted Vegetation
Index (SAVI)
Fraction of Absorbed Photosynthetically Active Radiation, calculates
fraction of Absorbed Photosynthetically Active Radiation
Ratios, Indices, IHS, PCA:
RTR
ARI
CHDET
PCA
DECORR (after PCA)
IHS
RGB
FUSE
FUSEPCT
FUSION
Image rationing
Image arithmetics
Principal Component Analysis
(RGB to IHS Conversion) Converts red, green, and blue (RGB)
image channels to intensity, hue, and saturation (IHS) image
channels. The IHS program is the inverse of the RGB program. The
Intensity-Hue-Saturation transformation is used by the FUSE and
FUSEPCT procedures to perform data fusion.
(IHS to RGB Conversion) Converts intensity, hue, and saturation
(IHS) image channels to red, green, and blue (RGB) image
channels.
(FUSE - data fusion for RGB colour image performs data fusion of a
Red-Green-Blue colour image with a black-and-white intensity
image. The result is an output RGB colour image with the same
resolution as the original B/W intensity image, but where the colour
(hue and saturation) is derived from the resampled input RGB
image. FUSE is an EASI procedure which uses the REGPRO, IHS,
and RGB programs to perform data fusion.
Data fusion for pseudocolour, performs data fusion of a
pseudocolour image with a black-and-white intensity image. The
result is an output RGB colour image with the same resolution as
the original B/W intensity image, but where the colour (hue and
saturation) is derived from the resampled input pseudocolour
image. FUSEPCT is an EASI procedure which uses the REGPRO, PCE,
IHS and RGB programs to perform data fusion.
Data fusion of two input images, creates an output RGB colour
image by fusing an input RGB colour or pseudocolour image with an
input black-and-white intensity image, using the IHS transform
(cylinder or hexcone model) or the Brovey transform.
NDVI
TASSEL
Compute NDVI (from AVHRR) (better use EASI or MODEL)
Tasseled cap transformation for Landsat MSS TM and ETM bands