TAHITI DUAL HC - HR - Portsdean Technical
TAHITI DUAL HC - HR - Portsdean Technical
TAHITI DUAL HC - HR - Portsdean Technical
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
750<br />
Installation types C12- C32- C42- C52- C82<br />
<strong>HR</strong>-<strong>HC</strong> 24 and <strong>HR</strong>-<strong>HC</strong> 32<br />
For installations with separate air intake and<br />
flue gas discharge pipes the split base kit (code<br />
0KITSDOP01) must be used. The kit consists of the<br />
following components (pic. 20):<br />
• no. 1 Ø 80 mm female stub pipe with flange for<br />
connection to the flue gas discharge pipe (flue gas<br />
deflector included);<br />
• no. 1 Ø 80 mm female stub pipe with flange for<br />
connection to the air intake pipe;<br />
• no. 1 standard air deflector;<br />
• no. 2 air intake diaphragm (43 and 52 mm);<br />
• fixing screws and seals.<br />
AIR INTAKE<br />
STUB<br />
PIPE<br />
NEOPRENE<br />
GASKET<br />
DIAP<strong>HR</strong>AGM<br />
NEOPRENE<br />
GASKET<br />
AIR<br />
DEFLECTOR<br />
FLUE GAS<br />
DISCHARGE<br />
STUB PIPE<br />
pic.20<br />
Air intake<br />
The minimum length of the air intake pipe is 0.5 metre.<br />
Each wide-radius 90° elbow (R=D) installed on the air intake pipe is equal to 1 m linear length.<br />
Each narrow-radius 90° elbow (R
Change language