MC55i AT Command Set

MC55i AT Command Set
12.2 AT+FBADLIN
12.2 AT+FBADLIN Bad Line Threshold
This command defines the Copy-Quality-OK-threshold. If consecutive lines have pixel count errors
in normal resolution (98 dpi) mode, then the copy quality is unacceptable. If * 2 consecutive lines have
pixel count errors in fine resolution (196 dpi) mode, then the copy quality is unacceptable. "Copy Quality Not OK"
occurs if either the error percentage is too high or too many consecutive lines contain errors. A value of 0 implies
that error checking is not present or disabled.
Syntax
Read Command
AT+FBADLIN
Response(s)
OK
Write Command
AT+FBADLIN=
Response(s)
OK
If error is related to ME functionality
ERROR
PIN ASC0 ASC1 MUX1 MUX2 MUX3 Charge Last Reference(s)
- + - + - - - - - EIA PN-2388
Parameter Description
(num)
Bad lines
0...10 (P) ...255
Note
• Used for Fax Class 2 only.
MC55i_ATC_V01.201 Page 309 of 482 1/14/09
Confidential / Released