01.01.2015 Views

MC55i AT Command Set

MC55i AT Command Set

MC55i AT Command Set

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

<strong>MC55i</strong> <strong>AT</strong> <strong>Command</strong> <strong>Set</strong><br />

<br />

3.4 <strong>AT</strong>+CEER<br />

Number Description<br />

34 service option temporary out of order<br />

35 NSAPI already used<br />

36 regular PDP context deactivation<br />

37 QoS not accepted<br />

38 network failure<br />

39 reactivation requested<br />

40 feature not supported<br />

causes related to invalid messages<br />

81 invalid transaction identifier value<br />

95 semantically incorrect message<br />

96 invalid mandatory information<br />

97 message type non-existant or not implemented<br />

98 message type not comaptible with protocol state<br />

99 information element non-existent or not implemented<br />

100 conditional information element error<br />

101 message not compatible with protocol<br />

111 protocol error, unspecified<br />

3.4.12 Proprietary release cause for Session Management (SM)<br />

Number<br />

Description<br />

3 the MS has not got any answer to the ACTIV<strong>AT</strong>E PDP CONTEXT request message sent five<br />

times to the network<br />

4 a MT PDP context which is active or in the activation process is deactivated because another<br />

MT PDP context with the same TI is requested by the network to be activated<br />

5 a MT PDP context which is active or in the activation process is deactivated because another<br />

MT PDP context with the same TI is requested by the network to be activated. The activation<br />

request is rejected by the SM sending the cause 'insufficient resources' to the network<br />

because the SM was not able to perform the necessary comparisons for a static PDP address<br />

collision detection.<br />

6 a MT PDP context which is active or in the activation process is deactivated because another<br />

MT PDP context with the same TI is requested by the network to be activated. As a static PDP<br />

address collision with an MO activating PDP context has been detected by the SM the SM discards<br />

the activation request<br />

7 a MT PDP context request has been indicated but could not be processed in time. The activation<br />

request is rejected by the SM sending the cause 'insufficient resources' to the network.<br />

3.4.13 GSM cause for L3 Protocol module or other local cause<br />

Number<br />

Description<br />

2 no detailed cause<br />

<strong>MC55i</strong>_<strong>AT</strong>C_V01.201 Page 82 of 482 1/14/09<br />

Confidential / Released

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!