MC55i AT Command Set

MC55i AT Command Set
12.11 AT+FDIS
12.11 AT+FDIS Query or set session parameters
This command allows the controlling application to sense and constrain the capabilities used for the current session.
It uses AT+FDIS to generate DIS or DTC messages directly, and uses AT+FDIS and received DIS messages
to generate DCS messages.
Syntax
Test Command
AT+FDIS=
Response(s)
(list of s), (list of s), (list of s), (list of s), (list of s), (list of s), (list of s),
(list of s)
OK
Read Command
AT+FDIS
Response(s)
, , , , , , ,
OK
Write Command
AT+FDIS=, , , , , , ,
Response(s)
OK
PIN ASC0 ASC1 MUX1 MUX2 MUX3 Charge Last Reference(s)
- + - + - - - - - EIA PN-2388
Note
• Used for Fax Class 2 only.
MC55i_ATC_V01.201 Page 318 of 482 1/14/09
Confidential / Released