Service Service Service

12 190X6&170X6 LCD
Go to cover page
Front View
Mechanical Instructions
Step 2: Unscrew 3 screws as shown in Fig. 4.
Back View
Fig. 1
Fig. 4
Step 3:
-Unscrew the four screws as shown in Fig. 5.
- Remove the base.
Fig. 5
Step 1: Use "l" type screwdriver to remove the Logo Cover as shown
in Fig. 3.
Step 4: Remove the front bezel
- Use thin "l" type screwdriver to open 4 clicks on bottom
side as shown in Fig. 6.
- Use thin "l" type screwdriver to open 3 clicks on right
and left side as shown in Fig. 7.
- Use thin "l" type screwdriver to open 4 clicks on top
side as shown in Fig. 8.
Clip
========>
========>
========>
========>
Fig. 6
Fig. 3
======>
======>
Fig. 7
======>