Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
OMNI 500 SERIES VALVES<br />
1/2” Valve Bodies (In-Line) 3.8 Cv<br />
3/4” Valve Bodies (In-Line) 5.0 Cv<br />
1/2” Valve Bodies (Stacking) 5.0 Cv<br />
STACKING BODY<br />
IN-LINE BODY<br />
Stacking Order<br />
Information<br />
All OMNI series valve stacks and common<br />
wireway stacks are assembled with tie<br />
rods at the factory at no additional charge.<br />
The ordering procedure is very simple.<br />
First List the quantity and model of<br />
each type of valve required.<br />
Second When using a 42 operator, only<br />
one spacer is required per valve.<br />
Third For common wireway stacks, specify<br />
model enclosure. In most cases where<br />
a 3-way valve function is required in<br />
a stack, a pipe plug is used to block<br />
one of the cylinder ports.<br />
Fourth Callout stacking base plate assembly<br />
(vertical only) #500-1223.*<br />
STACKING TOP PLATE<br />
Note:<br />
2 Valve Stacks with common wireway must have<br />
1 pc #45A01095 spacer.<br />
Order Numbers for Common Wireway Enclosures<br />
Description<br />
Model<br />
2 valves, single solenoid enclosure 50-1192<br />
2 valves, double solenoid enclosure 50-1193<br />
3 and 4 valves, single solenoid enclosure 50-1194<br />
3 and 4 valves, double solenoid enclosure 50-1195<br />
5 valves, single solenoid enclosure 50-1196<br />
5 valves, double solenoid enclosure 50-1197<br />
6 through 8 valves, single solenoid enclosure 50-1198<br />
6 through 8 valves, double solenoid enclosure 50-1199<br />
STACKING BASE PLATE<br />
57<br />
*Note: Vertical base assembly consists of<br />
base plate, top plate, bolts and o’rings.<br />
STACKING SPACER