Alkon Catalog

INDY TECHNICAL INFORMATION
INDY AU SERIES OPERATING SPECIFICATIONS
• Media: Air and inert gasses
• Filtration: 40 microns
• Pressure Range:
Pilot Air - Maximum 30 psig to 150 psig and not less
than main air supply. Vacuum to 30 psig available.
Main Supply - 30 to 150 psig (standard)
• Temperature: 0 o to 180 o F
• Flow Capacity: 1.4 to 12.5 Cv
• Lubrication: All valves are prelubricated and will
operate with dry air (no additional lubrication required)
However, a lubricated system will greatly extend the
service life of any valve
ELECTRICAL:
AU-1 & AU-2 Electrical Characteristics
Standard Voltage Inrush Current Holding Current Power
120 VAC 50/60 Hz 60mA 50mA 6 watts
24 VDC 60mA 60mA 1.44 watts
AU-1 & AU-2 Multiple Voltage Electrical Characteristics
Standard Voltage Inrush Current Holding Current Power
24 - 120 VDC 55mA + 10% 50mA + 10% Actual Voltage x .055
48 - 120 VAC 50/60 Hz 125mA + 25% 50mA + 10% Actual Voltage x .055
AU-5 Electrical Characteristics
Standard Voltage Inrush Current Holding Current Power
110 VAC 50/60 Hz 130mA 80mA 8.8 watts
120 VAC 50/60 Hz 110mA 70mA 8.4 watts
240 VAC 50/60 Hz 60mA 30mA 7.2 watts
24 VDC 290mA 290mA 6.9 watts
120/60 Hz can be connected to 110/50 Hz.
Encapsulated coils are standard.
All solenoids are designed to meet or exceed
UL and CSA standards.
Coils are rated for continuous duty.
75
Cv Conversion to S.C.F.M.
Cv P.S.I.G. S.C.F.M.
1 40 27
1 50 32
1 60 37
1 70 42
1 80 47
1 90 52
1 100 57