NIBP Controller Owner's Guide - ADInstruments

offline measurement of cycle height. This is particularly useful when the
pulse amplitude is modulated by a respiratory artefact.
c. Ratemeter: The Cyclic Measurements ‘Rate’ function can be set up to
accurately measure and display the tail pulse rate, and to directly indicate
the position of the systolic blood pressure point (as shown in Figure 2–4).
Figure 2–4
Measurement of tail pulse
rate using the Rate function
of Cyclic Measurements.
In Zoom View, the cursor is
used to display a data value
at a specific time point
(the value of the selected
channel is displayed above,
along with the time point)
24
NIBP Controller Owner’s Guide