MAINTENANCE MANUAL - Meritor

Disassembly
D - Manually remove the adjusting rings (figure
09).
Disassembly of the Satellite Box
A - Check, before the disassembly, if the halves
of the satellite boxes (single and with a
flange), have a marked assembly position.
If not, mark them so that the original position
is maintained in the reassembly (figure
11).
B - Loosen the setscrews of the two halves of
the box.
Figure 09
E - Remove the satellite box with safety and
place it on a bench (figure 10).
Figure 11
C - Separate the two halves of the box and remove
the internal components, in the sequence
indicated (figures 12, 13, 14 and 15).
Figure 10
Figure 12
Figure 13
10 MAINTENANCE MANUAL