VG-170 Instruction Manual
VG-170 Instruction Manual
VG-170 Instruction Manual
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
12 EN<br />
The included USB-AC adapter has been designed<br />
to be used for charging and playback. Do not take<br />
pictures while the AC adapter is connected to the<br />
camera.<br />
Be sure to unplug the power plug of the USB-AC<br />
adapter from the wall outlet when the charging is<br />
complete or the playback ends.<br />
The battery can be charged while the camera is<br />
connected to the computer. Charging time varies<br />
depending on the performance of a computer. (There<br />
may be cases in which it takes approx. 10 hours.)<br />
Connecting the camera<br />
Connector cover<br />
AC outlet<br />
or<br />
Multi-connector<br />
USB connector<br />
(supplied)<br />
Indicator lamp<br />
Indicator lamp<br />
On: Charging<br />
Off: Charged<br />
The battery is not fully charged at the time of<br />
purchase. Before use, be sure to charge the battery<br />
until the indicator lamp turns off (up to 4 hours).<br />
If the indicator lamp does not light, the camera is not<br />
correctly connected or the battery, camera, or USB-<br />
AC adapter may not be functioning as expected.<br />
When to charge the batteries<br />
Charge the battery when the error message shown below<br />
appears.<br />
Flashes in red<br />
Battery Empty<br />
Setting up using the supplied CD<br />
Installation of [ib] computer software using the<br />
supplied CD is available on Windows computers only.<br />
Windows<br />
1 Insert the supplied CD in a CD-ROM drive.