08.01.2015 Views

LTV 1200 Operator's Manual - AARC.org

LTV 1200 Operator's Manual - AARC.org

LTV 1200 Operator's Manual - AARC.org

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

Control Locking<br />

The front panel controls may be locked so that settings cannot be accidentally changed. When the<br />

controls are locked, the Control Lock LED will be on. If you try to select or change a control while the<br />

Control Lock is on, the message LOCKED will be displayed in the display window and the Control<br />

Lock LED will flash.<br />

Two different levels of difficulty can be set for control unlocking: Easy and Hard. The Easy unlocking<br />

method should be used when only trained personnel have access to the ventilator. The Hard method<br />

should be used when children or others may have access to the ventilator and you want to prevent<br />

accidental changes to the control settings. Easy unlocking is the default and this setting is changed<br />

using the Extended Features menus 11 .<br />

To turn the Control Lock on:<br />

1) Push the Control Lock button.<br />

The Control Lock LED is on whenever the front panel controls are locked.<br />

If you push a button while the controls are locked:<br />

1) The Control Lock LED will flash.<br />

2) LOCKED will be displayed in the display window.<br />

3) The button push is ignored.<br />

To turn the Control Lock off with Easy unlocking:<br />

1) Push the Control Lock button.<br />

To turn the Control Lock off with Hard unlocking:<br />

1) Push and hold the Control Lock button for 3 seconds.<br />

These controls are not affected by the Control Lock and operate even when the Control Lock is on:<br />

<strong>Manual</strong> Breath, Silence Reset, Select.<br />

NOTE<br />

The Control Lock button also serves as an “escape” key from the Extended Menu.<br />

REMARQUE<br />

Le bouton de verrouillage sert aussi de touche d'échappement pour quitter le menu Fonctions<br />

avancées.<br />

Control Retention<br />

Once a control value is set, that value will be retained in non-volatile memory 12 . The settings retained<br />

in non-volatile memory may be used when the ventilator is next powered up.<br />

11 See Chapter 10 - Extended Features, Control Unlock for more information.<br />

12 Non-volatile memory is memory that is not erased when the ventilator is turned off or disconnected.<br />

Operator’s <strong>Manual</strong> <strong>LTV</strong> ® <strong>1200</strong> / 1150 Ventilators Page 5-7<br />

P/N 19802-001 Rev. F

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!