Каталог Weidmuller: Enclosures and Cable Glands

Introduction
Enclosures
Drawing design – For chapter B
The drawings contained in chapter B are constructed in the
following way.
B
To identify the enclosure side views, these are marked with the
letters A, B, C, D, E, and F. The schematic 3D representations
shown underneath are of an enclosure that has been wallmounted.
F shows the view of the enclosure lid (front aspect),
E marks the inner surface of the enclosure (view into the
enclosure when the lid has been opened).
A shows the view of the enclosure from above and
B the view of the enclosure from underneath.
C shows the left and
D the right side of the enclosure.
E is the view from the front into the enclosure‘s interior,
without a lid.
You can find the dimensions of the enclosure sides for all
enclosure sizes in each drawing.
A = top
B = bottom
C = left
D = right
E = enclosure base
F = enclosure lid
B.8