08.01.2015 Views

Каталог Weidmuller: Enclosures and Cable Glands

Каталог Weidmuller: Enclosures and Cable Glands

Каталог Weidmuller: Enclosures and Cable Glands

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

for outer Tu 25 °C<br />

25.5 W<br />

for outer Tu 35 °C<br />

20.1 W 20.1 W<br />

for outer Tu 45 °C<br />

14.8 W 14.8 W 14.8 W<br />

9.7 W<br />

9.7 W<br />

4.7 W<br />

9.7 W<br />

4.7 W<br />

0.0 W<br />

Max interior Tu 50 °C Max interior Tu 60 °C Max interior Tu 70 °C Max interior Tu 80 °C<br />

Tu max = Max. permitted device temperature<br />

6<br />

Factory automation<br />

FieldPower ®<br />

Modular components<br />

FieldPower ® terminals or a mounting rail can be placed as<br />

needed in the lower section in order to fit the needs of the<br />

individual application. Retractable IP65 seals allow<br />

pluggable cables to be inserted quickly. Either a flat or<br />

raised cover can be used depending on the requirements.<br />

Application specific solutions<br />

Weidmüller offers not only individual<br />

components but also complete, custom-fit<br />

functional units.<br />

Housing grouped together<br />

If multiple housings are required, these can be aligned<br />

directly adjacent to each other. A seal connecting the two<br />

adjacent housings is sufficient in this case to provide IP54<br />

protection. No line sheathing is required there. This saves<br />

times since the line needs to be stripped only once for the<br />

entire housing group.<br />

F<br />

Variable fastening mechanisms<br />

The mounting rail provides 54 mm of installation width <strong>and</strong><br />

can be used at two heights. This creates space for wires<br />

under the mounting rail. Mounting plates or circuit boards<br />

can easily be attached to the cover.<br />

Such units include switching devices, electronic<br />

components, terminal strips, connecting plugs,<br />

hinged lids <strong>and</strong> heat sinks.<br />

Weidmüller can also customise the internal<br />

wiring <strong>and</strong> the assembly of the connecting<br />

cables to fit customer needs.<br />

3~, N, PE<br />

Exp<strong>and</strong>ed voltage <strong>and</strong> current ranges<br />

A variety of applications can be implemented with the help<br />

of the FieldPower ® Terminals in the AC <strong>and</strong> DC versions up<br />

to 800 V/41 A.<br />

2 x DC, GND<br />

Pv zul [W]<br />

40.0<br />

35.0<br />

30.0<br />

25.0<br />

20.0<br />

15.0<br />

10.0<br />

5.0<br />

0.0<br />

0 10 20 30 40 50 60 70 80<br />

Outer Tu [°C]<br />

Help with project planning<br />

Simple thermal layout using dimensioned drawings is<br />

possible (see page F.16) <strong>and</strong> by specifying the built-in<br />

power loss <strong>and</strong> optimal exploitation of available space.<br />

56 56<br />

2 10<br />

46 46<br />

135<br />

Ø 3.4<br />

Ø 7.8<br />

4.35<br />

115.4<br />

Please send requests to KSL@weidmueller.de<br />

159<br />

7.6<br />

F.3

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!