VPAL100 Software Upgrade Procedure - messkom.de

More documents

Recommendations

Info

When in the upgrade process, your unit’s screen will turn dark – this is normal. Your unit will display “Softupgrade in progress, don’t disconnect the Set!” The download process will take 20-25 minutes. Do not disconnect your test set as this will corrupt the upgrade process. 5. After the PC software and Test set indicates the process is finished, select complete and the unit will reboot automatically. As an added precaution you can power down the unit once more but this should not be necessary. Power up the unit and wait until the main screen is shown and initialization process is completed. Your unit is now upgraded and ready to go. 6. Verify that the new software has been uploaded to the unit using either the Reveal Software Check Test Set Feature or by checking the unit itself. Go to Main Menu, “Settings, and “About” Confidential and Proprietary Information of VeEX Inc. Page # 6
END OF PROCEDURE Confidential and Proprietary Information of VeEX Inc. Page # 7
Page 1 and 2: Revisions Nov. 12, 2006. Nov. 17, 2
Page 3 and 4: On your PC: On the MX, BX or CX: Go
Page 5: 3. Select the software section and

VPAL100 Software Upgrade Procedure - messkom.de

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?