Reference Manual - clv490.pdf - Machine Vision Components
Reference Manual - clv490.pdf - Machine Vision Components
Reference Manual - clv490.pdf - Machine Vision Components
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Chapter 1<br />
Notes on this document<br />
Operating Instructions<br />
CLV 490 Bar Code Scanner<br />
1.3 Information content<br />
This document contains all the information required to mount, install, and start up the CLV<br />
with the factory settings.<br />
A series of step-by-step instructions is provided for each of these activities.<br />
Configuration of the CLV for the application-specific reading situations is carried out with<br />
the Windows-oriented PC software "CLV-Setup". Further assistance is also available in the<br />
form of the online help system CLV-Setup Help. The procedure for installing and operating<br />
the software is described in the appendix.<br />
For further information on the design of the bar code scanner or on bar code technology in<br />
general, please contact the Division Auto Ident at SICK AG.<br />
1.4 Symbols<br />
Some of the information in this document is marked specially so that you can access it<br />
quickly:<br />
Warning!<br />
Warnings are provided to prevent injury to operating personal or serious damage to the bar<br />
code scanners.<br />
¾ Always read warnings carefully and observe them at all times.<br />
Note<br />
Explanation<br />
Recommendation<br />
Tip<br />
Default<br />
SCANNING FREQUENCY<br />
"Host receive fault"<br />
Indicates special features or characteristics.<br />
Explanations provide background information on technical features.<br />
Recommendations help you carry out certain procedures more effectively.<br />
Tips explain settings in the user interface of the "CLV-Setup" program.<br />
Marks a section containing the factory defaults.<br />
This typeface is used to refer to a term in the "CLV-Setup" program.<br />
Icons refer to buttons in the "CLV-Setup" program.<br />
This typeface is used for messages output via the terminal interface of the CLV.<br />
This symbol is used to mark sections that describe steps carried out with the "CLV-Setup"<br />
program.<br />
This symbol refers to additional technical documentation.<br />
¾<br />
Ö<br />
Here you have to do something. This symbol characterizes single-step operating<br />
instructions. Multiple-step operating instructions are characterized by sequential numbers.<br />
Here you select a function of the "CLV-Setup" user interface.<br />
1-2 © SICK AG · Division Auto Ident · Germany · All rights reserved 8 008 796/0000/25-06-2002