Reference Manual - clv490.pdf - Machine Vision Components

Operating Instructions Chapter 10
CLV 490 Bar Code Scanner
Appendix
10.13 Accessories
10.13.1 Mounting accessories
Order No. Description Figure
2 016 110 Quick clamping device, complete with securing material Fig. 10-61
2 013 824 Angle bracket, single, with 2 screws M 6 x 10 mm, self-locking Fig. 10-59
2 018 435 Articulated bracket (two angle brackets 2 013 824), with 2 screws M 6 x 10 mm, self-locking Fig. 10-60
Table 10-11: Accessories: mounting accessories
Order No. Type Description
10.13.2 Connection modules
1 017 134 AMV 60-011 Connection Module for one CLV 490 without heater, with 1 x 15-pin D Sub HD device socket/plug,
terminal strips (signal distributor) for connecting the data and function interfaces, internal 9-pin D
Sub "Service" plug, strain-relief clamps, polycarbonate housing, enclosure rating IP 30 (max. IP 54),
operating voltage 18 ... 30 V DC
1 017 139 AMS 60-013 As AMV 60-011, with integrated power pack: 230 V AC 50 Hz/24V DC
1 017 140 AMS 60-012 As AMV 60-011, with integrated power pack: 115 V AC 50/60 Hz/24V DC
1 017 387 AMS 60-023 As AMS 60-013, with 2-row LCD
1 017 391 AMV 30-071 Connection Module with two CLV 490 without heater, with 2 x 15-pin D Sub HD device socket/plug,
terminal strips (signal distributor) for connecting the data and function interfaces, two 9-pin D Sub
"Service" plugs, strain-relief clamps, polycarbonate housing, enclosure rating IP 30 (max. IP 54),
operating voltage 18 ... 30 V DC
1 019 592 AMV 71-081 Connection module for CLV 490 without heater, with 1 x 15-pin D Sub HD device socket/plug,
spring terminal strips (signal distributors) for connecting the data and function interfaces, internal 9-
pin D-Sub "Service" plug, plastic cable glands, polycarbonate housing, enclosure rating max. IP 30.
With address function for network operation, operating voltage 10 ... 30 V DC
6 021 105 AMV 100-011 Universal Connection Module for one CLV 490 with/without heater, with 1 x 15-pin D Sub HD
device socket/plug, terminal strips (signal distributor) for connecting the data and function interfaces,
internal 9-pin D Sub "Service" plug, strain-relief clamps, cast aluminum housing, enclosure
rating IP 54 (max. IP 65 with connector cover), operating voltage 18 ... 30 V DC
6 021 106 AMV 200-011 As AMV 100, but for two CLV 490s with/without heater
6 007 655 – Power cable, 3-wire, length 2 m, with 3-pin connector (grounding) and one open end (stripped)
Table 10-12: Accessories: connection modules
Order No. Type Description
10.13.3 Bus connection modules
6 020 896 BMV 10-0111 Bus Connection Module for connecting one CLV 490 with/without heater to a Profibus DP, with 1 x
15-pin D Sub HD device socket/plug. With 9-pin D Sub bus socket, terminal strips (signal distributor)
for connecting the RS 232 and function interfaces, internal 9-pin D Sub "Service" plug, strainrelief
clamps, cast aluminum housing, enclosure rating IP 54 (max. IP 65 with connector cover),
operating voltage 20 ... 30 V DC
6 020 893 BMH 10-0111 Bus module for connection of one CLV 490 to Profibus DP; with terminal screws, a 9-pin D-sub bus
socket, no housing, for top-hat-rail installation, enclosure rating max. IP 20, operating voltage
10 to 30 V DC
6 021 190 BMV 10-0311 Bus connection module for connection of one CLV 490 to DeviceNet, terminal strips for bus
connection, otherwise, as BMV 10-0111
Table 10-13: Accessories: bus connection modules
8 008 796/0000/25-06-2002 © SICK AG · Division Auto Ident · Germany · All rights reserved 10-71