Minilyzer ML1 User Manual - NTi Audio

Basic Operation
Enter / Cursor Control
The cursor is the core control element of ML1, providing access to
its menus and to the current instrument settings. The cursor position
is represented by an inverted display (white on black) of the field
holding the cursor.
The cursor may be moved from menu to menu by using the four gray
arrow keys , , and . The enter key (↵) has to be pressed to
enter a submenu or to confirm the current selection.
To modify the menu status execute the following procedure:
• Move the cursor to the field of interest and press the enter key.
• Scroll to the required menu option by using the arrow keys.
• Confirm your selection by pressing the enter key.
Please note that in certain selection modes, the measurement result
will be updated with the new selection even before the enter key has
been pressed for confirmation.
For instance, if a new level unit is selected - but not yet confirmed - the
display will instantly update to the newly selected unit even before the
enter key has been pressed for confirmation.
In case of an unwanted change of any menu, the old status may be
re-established by pressing the ESC-key.
Display Mode
Giving a better readability the display mode determines the rapidity of
following up input signal changes. The available modes are:
• SLOW
3 sec. averaging
• NRM
1 sec. averaging
• FAST
no averaging
If averaging is active, measurements are smoothed in an exponential
way (exponential time constant) before being displayed.
12