Unpack printer - Lexmark
Unpack printer - Lexmark
Unpack printer - Lexmark
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>Lexmark</strong> Pro200 Series Installation<br />
1 <strong>Unpack</strong> <strong>printer</strong><br />
Notes:<br />
• Place the <strong>printer</strong> near the computer<br />
during setup. If you're setting up on<br />
a wireless network, then you may<br />
move the <strong>printer</strong> after setup is<br />
complete.<br />
• Do not attach the USB cable until<br />
prompted to do so.<br />
• The packaged printhead is shipped<br />
inside the <strong>printer</strong>.<br />
• Contents may vary by model and<br />
region.<br />
2 Remove tape and packing material from all areas of the<br />
<strong>printer</strong>
<strong>Lexmark</strong> Pro200 Series Installation<br />
3 Raise paper support<br />
4 Raise <strong>printer</strong> control panel
<strong>Lexmark</strong> Pro200 Series Installation<br />
5 Open <strong>printer</strong> and remove packaged printhead from<br />
<strong>printer</strong><br />
6 If necessary, insert correct (1) language overlay and install<br />
(2) protective cover
<strong>Lexmark</strong> Pro200 Series Installation<br />
7 Lock the protective cover in place<br />
8 Close <strong>printer</strong>
<strong>Lexmark</strong> Pro200 Series Installation<br />
9 Use lever to extend paper guides<br />
10 Load paper<br />
Note: Use the lever to adjust the paper<br />
guides.
<strong>Lexmark</strong> Pro200 Series Installation<br />
11 Extend paper exit tray<br />
12 Connect power cord only<br />
Note: DO NOT attach the USB cable yet.<br />
CAUTION—POTENTIAL INJURY: Read the safety information included with this product before connecting<br />
power or making any cabling connections.<br />
13 Make sure <strong>printer</strong> is on
<strong>Lexmark</strong> Pro200 Series Installation<br />
14 Set language<br />
1 Using the <strong>printer</strong> control panel, press<br />
or until the language you want<br />
is highlighted on the display.<br />
2 Press OK to save.<br />
15 Set country/region<br />
1 Using the <strong>printer</strong> control panel, press<br />
or until the country or region<br />
you want is highlighted on the display.<br />
2 Press OK to save.<br />
16 Set up fax<br />
1 Using the <strong>printer</strong> control panel, press<br />
or until Yes is highlighted on the<br />
display.<br />
2 Press OK.
<strong>Lexmark</strong> Pro200 Series Installation<br />
17 Set date and time<br />
1 Using the keypad on the <strong>printer</strong><br />
control panel, set the date. Press<br />
or to scroll between the month, day,<br />
and year. Date format varies<br />
depending on selected country or<br />
region.<br />
2 Press OK.<br />
3 Using the keypad on the <strong>printer</strong><br />
control panel, set the time. Press<br />
or to scroll between the hours,<br />
minutes, and time format. Press<br />
or to choose a time format.<br />
4 Press OK to save.<br />
18 Enter fax number and fax name for your <strong>printer</strong><br />
1 Using the keypad on the <strong>printer</strong><br />
control panel, enter your fax number.<br />
2 Press OK to save.<br />
3 Using the keypad on the <strong>printer</strong><br />
control panel, enter the fax name for<br />
your <strong>printer</strong>.<br />
4 Press OK to save.<br />
19 Open <strong>printer</strong> and remove any tape from latch<br />
Note: The carriage moves to the<br />
printhead installation position as shown.
<strong>Lexmark</strong> Pro200 Series Installation<br />
20 Squeeze and lift latch<br />
21 Remove printhead from disposable container<br />
22 Insert printhead and close latch until it clicks
<strong>Lexmark</strong> Pro200 Series Installation<br />
23 Close <strong>printer</strong><br />
24 Open <strong>printer</strong><br />
Note: The printhead moves to the<br />
cartridge installation position as shown.
<strong>Lexmark</strong> Pro200 Series Installation<br />
25 First, insert each color ink cartridge. Then, use two hands<br />
to install black cartridge.<br />
26 Close <strong>printer</strong>
<strong>Lexmark</strong> Pro200 Series Installation<br />
27 Press OK to print alignment page<br />
Notes:<br />
• Do not remove the page until<br />
printing stops. The alignment page<br />
may take a while to print and will<br />
move in and out during the process.<br />
• Streaks on the alignment page are<br />
normal and not an indication of a<br />
problem.<br />
• The alignment page that prints may<br />
differ from the one shown.<br />
• Recycle the alignment page.
Change language