Rugged Operating System (ROS ® ) Software User ... - RuggedCom

Preface
RUGGEDCOM ROS
User Guide
CLI Command Syntax
The syntax of commands used in a Command Line Interface (CLI) is described according to the following
conventions:
Example
command
command parameter
Description
Commands are in bold.
Parameters are in plain text.
command parameter1 parameter2 Alternative parameters are separated by a vertical bar (|).
command parameter1 parameter2
command [ parameter1 | parameter2 ]
command { parameter3 | parameter4 }
command parameter1 parameter2 { parameter3 |
parameter4 }
Parameters in italics must be replaced with a user-defined value.
Square brackets indicate a required choice between two or more
parameters.
Curly brackets indicate an optional parameter(s).
All commands and parameters are presented in the order they must
be entered.
Related Documents
Other documents that may be of interest include:
• ROS Installation Guide for RUGGEDCOM RSG2100
• RUGGEDCOM Fiber Guide
• RUGGEDCOM Wireless Guide
• White Paper: Rapid Spanning Tree in Industrial Networks
System Requirements
Each workstation used to connect to the ROS interface must meet the following system requirements:
• Must have one of the following Web browsers installed:
▪ Microsoft Internet Explorer 8.0 or higher
▪ Mozilla Firefox
▪ Google Chrome
▪ Iceweasel/IceCat (Linux Only)
• Must have a working Ethernet interface compatible with at least one of the port types on the RUGGEDCOM
device
• The ability to configure an IP address and netmask on the computer’s Ethernet interface
xii
CLI Command Syntax