Empowered by Innovation - NEC UX5000

More documents

Recommendations

Info

Issue 2.0 UX5000 PVAU NAT Traversal 7.4 NAPT Configuration Check Box – Should be utilized if the CCPU is on the LAN side of NAT router and the PVA-NAT is on the WAN. Set port forwarding for all the RTP ports utilized by the VOIPDB (32, 64, 128) in Program 84-26. Port forwarding on the NAPT router must reflect Program 84-26 settings. Also set the SIP port in Program 10-46-06 to be forwarded by the router (default 5080). VOIPDB 32 open UDP ports 10020 ~ 10083 VOIPDB 64 open UDP ports 10020 ~ 10147 VOIPDB 128 open UDP ports 10020 ~10275 WAN IP Address of NAT Router = 10.1.1.1 Check if the UX5000 is in the LAN 16
UX5000 PVAU NAT Traversal Issue 2.0 7.5 CTI Proxy Configuration This setting is used for supporting the UX Softphone over NAT. With this enabled, a VPN connection is no longer needed. Define the port number for Desktop Suite (refer to Program 10-20-01, Device 9) 17
Page 1 and 2: Empowered by Innovation Technical S
Page 3 and 4: UX5000 PVAU NAT Traversal Issue 2.0
Page 17: UX5000 PVAU NAT Traversal Issue 2.0
Page 25 and 26: NEC Unified Solutions, Inc. 4 Fores

Empowered by Innovation - NEC UX5000

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?