Empowered by Innovation - NEC UX5000

UX5000 PVAU NAT Traversal Issue 2.0
7.9 Required IP Terminal Setting
LAN IP Terminal
• SIP Setting -> Server Address and URI -> 1 st ~ 4 th Server Address
- Enter the PVAU-NAT public IP address (12.3.3.3)
• SIP Setting -> SIP Server Port -> 1 st ~ 4 th Server Port
- Enter the port number (ex: 5080)
7.10 Router Setting (Remote)
No setting is required. If the operation does not work, set the port
forwarding:
• 5060 (SIP Signaling) to IP terminal
• 3462 (RTP Stream) to IP terminal
7.11 NAT Router Setting (System)
Port Forwarding
- Refer the following ports to the VOIPDB IP address (Program 10-12-09)
• 5080 (SIP Signal) to VOIPDB (Program 10-12-09)
• 5081 (SIP Signal) to VOIPDB (Program 10-12-09)
• RTP Stream (refer to Program 84-26)
- 10020~10051 to GW1 address
- 10052~10083 to GW2 address, etc.
• 8282 (for UX Softphone) to VOIPDB (Program 10-12-09)
21