Single-cylinder piston pump HSP 1030

Dual component
annular gap injection
Pump:
Pressures:
HSP 1030 with travel sensor
up to 6 MPa (870 psi)
Location of pump:
Distance:
Pipeline: pipework
On the tunnelling machine or
in the rear area of the tunnel
Depending on the tunnel length
2 lines for each injection point
(mortar and accelerator)
Quantity:
Additive pump:
PM components:
max. 7 m³/h per injection point
Peristaltic pump
Pump, hydraulic pack and controller
Pressure monitoring at the injection
point
Volume- and pressure-dependent
controller
Optional: volume flow measurement
PM System components:
■ Pump unit
■ Pipelines
■ Interchangeable container
■ Feeding screw
■ Lifting and weighing devices
■ Mortar conveying system from above
ground into the tunnel
Putzmeister Products and Services:
Concrete Pumps · Industrial Technology PIT · Telebelt ·
Mörtelmaschinen GmbH · Dynajet High Pressure
Cleaners · Services · Concrete Project Division CPD ·
Consulting and Data Technology · Academy
Putzmeister AG
Max-Eyth-Str. 10 · D-72631 Aichtal
P.O.Box 21 52 · D-72629 Aichtal
Tel. +49 (71 27) 599-0
Fax +49 (71 27) 599-520
www.putzmeister.com
E-mail: pmw@pmw.de
BP 3882 GB
Right to make technical amendments reserved · All rights reserved · © by Putzmeister AG 2007 · Printed in Germany (PM)