Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
7<br />
8<br />
Fig. 7. Fixing the motor housing with motor inside to the <strong>machine</strong><br />
II-1b. Placing the motor for drive of the spindle<br />
Put the motor with the larger coupling in the second motor<br />
housing (procedure same as shown in fig. 3 and 4). Push the<br />
plastic coupling of the motor over the corresponding metal<br />
coupling of the spindle axis and push further until the screw 9a<br />
comes into the slot 3b of the casing (fig. 8 and 9). Fasten screw<br />
9a (fig. 10).<br />
Fig. 10. Fixing the motor housing with motor inside to the <strong>machine</strong><br />
II-2. Connecting the air hoses for pneumatic drive<br />
The automatic <strong>MEEK</strong> <strong>machine</strong> was supplied with a hose with Y-<br />
crossing and 3 connectors. Two connectors are identical and<br />
one is different. Connect the 2 identical connectors to the two<br />
motors of the <strong>machine</strong> (simply push the connectors over the<br />
motor inlets, as shown in fig. 11).<br />
Fig. 8. Placing the motor for driving<br />
the spindle axis on the <strong>machine</strong><br />
Fig. 9. Motor in correct position<br />
Fig. 11. Coupling the<br />
hose to the motor