INDUSTRIAL LIFTING PRODUCTS - Lift Turn Move

Motorized - Rope winch Type ESF
92
ESF winches are designed as modular rope winches for small and
medium loads with worm gearbox. The simple design is suitable
for many lifting tasks with lower load cycles and small load
requirements. The winch can also be integrated into a construction
by using the mounting holes on all sides of the gearbox casing.
The wire can take off in any direction. It has a compact design,
because the basic configuration only consists of gearbox, motor,
and drum. The robust outward impression of the ESF winch is
completed by practical corrosion protection and a combination of
high-quality finishing and galvanised parts.
Options:
• Grooved drum
• Divided drum
• Pressure roller
• Load limiter
• Limit switches
• Slack rope device
• Special protection
• Control equipment
Power 400V, 3ph, 50Hz 230V, 1pg, 50 Hz
1 st layer Lifting capacity (kg) 150 250 500 200 400
Rope capacity
3 rd layer
Rope capacity (m) 3,4 2,8 3,2 3,4 3,2
Speed (m/min) 8,3 7,2 7,5 7,1 7,5
Lifting capacity (kg) 125 200 400 165 320
Rope capacity (m) 11,5 9,6 11,0 11,5 11,0
Speed (m/min) 10,2 9,1 9,4 8,6 9,4
Max. no. of Layers 3 6 5 6 6 6
Max rope capacity
(m)
26 17,8 25 26 25
Rope Ø (mm) 4 5 6 4 6
Power (kW) 0,37 0,55 1,1 0,55 1,1
Current (A) 1,09 1,43 2,82 4,5 7,5
Weight (kg) 18 21,5 38 23 43,5
Type ESF 150 250 500 200 400
DImensions (mm)
Type
ESF
A B H Center
Drum
Ø
Flange Ø
Drum Length
150 94 145 72.5 70 140 61
200 94 145 72.5 70 140 61
250 94 145 72.5 70 140 61
400 125 200 100 90 190 67
500 125 200 100 90 190 67
incl. Pressure roller and base
150 225 200 84.5 70 140 61
200 225 200 84.5 70 140 61
250 225 200 84.5 70 140 61
400 280 220 112 90 190 67
500 280 220 112 90 190 67