M7CL Quick Start Guides.

M7CL Quick Start Guide Part 1
The Basics;
Sends on fader; an easy way of mixing Mix Groups/auxiliaries. (Monitor, FX or
Matrix Sends)
Auxiliaries can be adjusted by the encoders to the side or below the screen but for efficient monitor mixing a third
option is provided; SENDS ON FADER. (Like fader flip on other Yamaha digital mixers, but the master is not assigned
to an encoder).
Tip; Press User Defined
Key 1 to enter
MIX ON FADER or key
2 to enter MATRIX ON
FADER.
Tip; Press the assign
button a second time
to CUE the mix. The
button goes yellow.
Press SENDS ON FADER
in the function access
panel and the console
changes mode.
Press the different assign
buttons to bring
different mixes to the
faders.
Now input faders are assigned to be aux mix faders and each aux mix can be mixed in this way in turn. This way of
working is really popular with monitor engineers.
Faders Mix Monitors
Note; When in SENDS
ON FADER mode all
the [SEL] key lights
are on, except the SEL
channel; it flashes.
Tip; You can press
the mix encoder buttons,
rather than the
screen ,to select the
different mixes if you
prefer.
MATRIX ON
FADER
MIX ON
FADER
To access Matrix on Fader,
press the MIX/MTRX button.
M7CL has 16 Mix Groups and these are ideal for mixing monitors with
SENDS ON FADER. M7CL also has 8 Matrix Groups. In addition to the
usual Matrix function of mixing the masters and mix groups, the Matrixes
can have inputs directly from input channels and behave just like the Mix
Groups for large monitor mixing projects.
So SENDS ON FADER has two pages; MIX ON FADER and MATRIX ON FADER.
Toggle between them with the screen MIX/MTRX button or use User
Defined key 1 and 2.
12