Eagle Eyes Antenna Pan/Tilt Assembly Instructions - Allendale Stores

More documents

Recommendations

Info

After adding the spacers included with the servos, place the servo in the hole as shown and push the gear assembly onto the servo shaft. Making sure the servo gear is engaging the smaller gear snugly, screw the servo into place using the included screws. Screw gear assembly to servo. Obtain the parts shown for the antenna mounting bracket. Add the two spacers to the front plate as shown. Add the back plate as shown. 6
Add the side supports as shown. Mount the servo as shown. Insert the screw through the hole on the side plat and into the hole on the side of the antenna support. Add the nut to the inside and tighten securely. With the servo centered, align the antenna support to the line shown (no line on beta models, align at a 45 degree angle from vertical). Attach servo to servo horn on the side support. NEED PICTURE 7
Page 1 and 2: Eagle Eyes Antenna Pan/Tilt Assembl
Page 3 and 4: Combine with second side support. O
Page 5: Insert the bolt through the hole on
Page 9: Assemble as shown Hangs on either s

Eagle Eyes Antenna Pan/Tilt Assembly Instructions - Allendale Stores

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?