Generator, Reader, Inserter AV-TC 300 - Alpermann + Velte
Generator, Reader, Inserter AV-TC 300 - Alpermann + Velte
Generator, Reader, Inserter AV-TC 300 - Alpermann + Velte
- No tags were found...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
User Manual <strong>AV</strong>-<strong>TC</strong> <strong>300</strong><br />
Page 13<br />
1. GENERATOR<br />
Apart from the menu adjustments the following keys are available for the generator<br />
configuration:<br />
hours minutes seconds frames<br />
set<br />
enter<br />
generator / reader<br />
1.1 Display Selection<br />
time / user<br />
With the generator / reader key the generated data can be switched over to the 8-digit<br />
display. When the generator values are indicated, the diode on the left hand of the<br />
generator / reader button lights up.<br />
The time / user button serves to switch over between time and user values. When the<br />
time values are displayed, the adjacent diode lights up; when user values are<br />
displayed, the diode remains switched off.<br />
1.2 Programming of <strong>Generator</strong> Time<br />
Switch the numerical display to indication of generator values using the generator<br />
/ reader key. The adjacent diode is lit up. Now select the option time using the<br />
key time / user . The adjacent diode is lit up. The display indicates the actual generator<br />
time in hours : minutes : seconds : frames.<br />
The programming mode is activated by the key set. The numerical display shows<br />
the last set time. Using the key hours the hours, using the key minutes the<br />
minutes, using the key the seconds and using the key frames the frames are<br />
selected. The selected digits flash. Use the keys and to change the values.<br />
Only plausible time values and frame numbers are accepted. Confirm by pressing<br />
enter.<br />
Until this moment you can cancel the operation pressing set again: the set mode<br />
is left without any change of time values.<br />
1.3 Adjustment of User Bits<br />
Switch the numerical display to indication of generator values using the generator<br />
/ reader key. The diode is lit up. Now select the option time using the key time / user .<br />
The diode doesn’t shine. The programming mode is activated by the key set. The<br />
numerical display shows the last set value. Using the keys hours, minutes,<br />
seconds and frames one of the four user groups are activated. The selected<br />
digits flash. Use the keys and to change the values. All hexadecimal values<br />
(0 to 9 and A to F) are available. Confirm by pressing enter.<br />
Until this moment you can cancel the operation pressing set again: the set mode<br />
is left without any change of user values.