Generator, Reader, Inserter AV-TC 300 - Alpermann + Velte

User Manual AV-TC 300
Page 41
Chap. Command Return
r get text 1 60 80 chk text 1 7x 80 *10 chk
r get text 2 60 81 chk text 2 7x 81 *10 chk
r get text 3 60 82 chk text 3 7x 82 *10 chk
r get text 4 60 83 chk text 4 7x 83 *10 chk
c insertion on/off 41 9e *11 chk ack 10 01 chk
r get insertion on/off 60 9e chk insertion status 71 9e *11 chk
c insertion control 0a 95 *12 chk ack 10 01 chk
r get insertion control 60 95 chk insertion control 7a 95 *12 chk
c insertion mode 05 96 *13 chk ack 10 01 chk
r get insertion mode 60 96 chk insertion mode 75 96 *13 chk
c insertion position 06 97 *14 chk ack 10 01 chk
r get insertion position 60 97 chk insertion position 76 97 *14 chk
c insertion mtd 0a 98 *15 chk ack 10 01 chk
r get insertion mtd 60 98 chk insertion mtd 7a 98 *15 chk
error nak 11 12 *1 chk
Chap.: Hint to corresponding chapter of the user manual.
chk: hexadecimal sum of previous bytes;
ack: acknowledge = OK return .
nak: not acknowledge = error
*1 : data1: bit 7: timeout
bit 6: framing error
bit 5: overrun error
bit 4: parity error
bit 3: command not available
bit 2: checksum error
bit 1: data not plausible
bit 0: unknown command
*2 : data1: bit 7: 1 )
bit 6: 0 ) AV-TC 300 device identifier
bit 5: 0 )
bit 4: 1 = DVITC generator installed
bit 3: 1 = LTC reader installed
bit 2: 1 = LTC generator installed
bit 1: 1 = Interface installed
bit 0: 1 = DVITC reader installed
data2: software version (BCD)
*3 : data1: first line (BCD)
data2: last line (BCD)