PLM Insert For Tractors S2012.pdf - New Holland PLM Portal

For a complete system the details and components are:-
1) Mobile RTK Base Station - Part Number: ZTN90510-65
Heavy Duty Tripod For Mobile Use – Part Number: ZTN1161
Note: For Fixed Base Station Parts and information. Please refer to the "GPS
Catalogue" for more information.
Then add to a NH262/NH372 Receiver – (Purchased through Wholegoods or
UK Parts):
2) AgGPS 450 - Rover Radio for the NH262/NH372: Part Number: ZTN53696-46
(This item sits below the NH262 receiver and takes the signal from the base station).
3) NH262 Upgrade to RTK (From "OmniSTAR Ready"): Part Number 73313988
(An unlock code to allow the NH262 to work with RTK).
3a) NH372 Upgrade to RTK (From "OmniSTAR Ready"): Part Number ZTN87858
(An unlock code to allow the NH372 to work with RTK).
Once your Parts Department have placed the order you need to email:
eugpsreceiverupgrade@cnh.com
With the following information:
• Serial no of the NH262 Receiver
• Part no ordered (73313988)
• CSPS no of the order
In the following days dealers will receive via email a pass code that can be loaded to the
receiver following instructions provided via the screen.
Important note: If you have a NH262 on a T8000 that’s factory fitted you may have to
upgrade first to OmniSTAR level, then again to RTK:
Part Number: 73313987
(EGNOS to OmniSTAR) - NH262 then ready for EGNOS & OmniSTAR
Part Number: 73313988
(OmniSTAR to RTK) - NH262 then ready for EGNOS, OmniSTAR & RTK
N.B. PLEASE ALLOW 48 HOURS
FOR THIS PROCESS
You can order both Part Numbers at once and receive both codes
at one time but you have to have both.
Updated 20/03/2012