PLM Insert For Tractors S2012.pdf - New Holland PLM Portal

T7000 – Mechanical Remotes - Now Available Factory Fitted!!!
(For Retro-Fitting see end over page)
1) Order T7000 (AGR) “IntelliSteer Ready” from Pricelist – (Option 525)
2) Order display - IntelliView III From Pricelist. (Option 528)
Then either:
3 a) Order “Completion Kit Parts” with the tractor from the Pricelist (Option 522).
Factory fit of Navigation Controller II and NH262 (at Level 2 – OmniSTAR Ready)
OR
3 b) Order Tractor IntelliSteer ready (as above) and then Order from the Parts
Department:
• NH372 Receiver (Level 2 – EGNOS/OmniSTAR Ready) - Part Number – 84588274
• Navigation Controller II - Part Number: 87518983
(The latter method may also be used if the customer is wanting to use existing Navigation
Controller II and NH262 Receiver e.g. from his combine – obviously omit ordering the 2 parts
above in this scenario).
4) Correction Signal – EGNOS Ready, OmniSTAR (subscription required) or RTK (with extra
parts required) - See Pricing and Details in Section 4.
5) Operator Manuals - See Section 5.
T7000 Auto-Command and Power Command Sidewinder II Tractors
(For Retro-Fitting see over page)
1) Order T7000 AC or PC “IntelliSteer Ready” from pricelist
Option 525 – All Auto-Command Tractors as well as
Power Command Tractors Without the
Exhaust Brake Option... OR
Option 526 – Power Command Sidewinder II Tractors
With the Exhaust Brake Option
2) IntelliView III Display Fitted as Standard – Touch Screen Allowing both Straight and curved
line guidance.
Then either:
3 a) Order “Completion Kit Parts” with the tractor from the Pricelist (Option 522).
Factory fit of Navigation Controller II and NH262 (at Level 2 – OmniSTAR Ready)
OR
3 b) Order Tractor IntelliSteer ready (as above) and then Order from the Parts
Department:
• NH372 Receiver (Level 2 – EGNOS/OmniSTAR Ready) - Part Number - 84588274
• Navigation Controller II - Part Number: 87518983
(The latter method may also be used if the customer is wanting to use existing Navigation
Controller II and NH262 Receiver e.g. from his combine – obviously omit ordering the 2 parts
above in this scenario).
4) Correction Signal – EGNOS Ready, OmniSTAR (subscription required) or RTK (with extra
parts required) - Details in Section 4.
5) Operator Manuals - See Section 5.
Updated 20/03/2012