MT350 Clutch Replacement - Peak Riders
MT350 Clutch Replacement - Peak Riders
MT350 Clutch Replacement - Peak Riders
- No tags were found...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>MT350</strong> <strong>Clutch</strong> <strong>Replacement</strong><br />
General Torque Values<br />
Where Torque settings are not detailed the following are a guide.<br />
M5<br />
M6<br />
M8<br />
M10<br />
7-8 Nm<br />
11-14 Nm<br />
24-27 Nm<br />
51-54 Nm<br />
Minimum Procedure<br />
If you need to replace the clutch plates in an emergency or quickly you can omit the<br />
references to the oil / seal changes. You will need to remove the battery and lay the bike<br />
on its side. Protect the area just in case some oil spills out of the filler cap or engine.<br />
Omit Slides 2, 3, 4, 5, 6, 29, 30, 47, 48, 49, 50, 51, 52 & 53<br />
File Location file: http://www.peakriders.org/files/mt350/tutorial/mt350clutch.pdf<br />
Joth Hill 14-Apr-2012 Rev DRAFT Page 4 of 12