Siemeca AMR ™ Network Node WTT16/WTX16 M-Bus ... - Armatec AB

Application Reset /
Select
With the aid of Application Reset, the response of the network node
can be configured for the meters stored. To this end, three groups of
data may be selected:
Selected
Data
Standard
Data
Statistical
Data
Tariff
Data
Meaning
Contains current values, cutoff date values and error
information.
Contains the consumption of the first measurand at the
end of each month concerned.
Contains the consumption of the second measurand at
the end of each month concerned (water meters only).
Table 5: Data Groups that May Be Selected at the Network Node for Each Meter Stored
Whenever an application reset is performed on a meter stored in the
network node, the standard and statistical data will be configured as
a standard response. An application reset can also be used to delete
an application error.
Application Reset
(Hex)
Code
CI field 1 50
Application Select
(Hex)
Code
CI Field 1 50
Sub code for
application select
2 30 Example: standard +
statistical data
22/56 For intra-company use only
Siemens
Netzwerkknoten WTT16/WTX16
Building Technologies The Network Node 09.03.2007