ROTAX MOJO MAX Challenge Technical Regulations ... - The FMSCI
ROTAX MOJO MAX Challenge Technical Regulations ... - The FMSCI
ROTAX MOJO MAX Challenge Technical Regulations ... - The FMSCI
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
13.3.2<br />
Outer diameter of clutch drum<br />
Diameter has to be measured with a sliding caliper just<br />
beside the radius from the shoulder (not at the open end of<br />
the clutch drum).<br />
Minimum diameter: 89,50 mm.<br />
13.3.3<br />
Inner diameter of clutch drum<br />
<strong>The</strong> inner diameter has to be measured with a sliding<br />
calliper. <strong>The</strong> measurement has to be done in the middle of<br />
the clutch drum (in the contact area of the clutch drum).<br />
Maximum diameter: 84,90 mm.<br />
Page 21 of 51 RMC/RMCGF <strong>Technical</strong> <strong>Regulations</strong> 2012 Edition: 27.02.2012 / Bull. 1
Change language