ROTAX MOJO MAX Challenge Technical Regulations ... - The FMSCI

More documents

Recommendations

Info

Radiator 18.1 18.2 18.3 18.4 18.5 18.6 18.7 Single aluminium radiator as shown in illustrations Name "ROTAX" stamped in the side of version 3. Version 1/2: Cooling area: Height:290 mm, width:133 mm Version 3: Cooling area: Height:290 mm, width:138 mm Version 1/2: Thickness of radiator = 32 mm Version 3: Thickness of radiator = 34 mm Place of fixing the radiator is on right side of engine. Radiator must be mounted with all components as shown in the illustration either like version 1/2 or like version 3. At version 2 there is 2 legal options to mount the radiator to the retaining plate (see drawing for details) At version 2 there is 2 different radiator with 2 different positions of the retaining plates (either pointing forward or backwards ) No additional non original cooling device is allowed. For version 1 and 2 tape applied around the radiator is the only allowed air flow control. Tape may not be removed from the radiator during operation on the track. All other means of air flow control through the radiator are prohibited. For version 3 the original plastic flap is the only way to control the airflow. Removal of the original plastic flap as well as use of tape, like for the version 1 and 2 of the radiator, is an acceptable configuration. 18.8 The removal of the thermostat from the cylinder head cover is an acceptable configuration. Version 1 Page 26 of 51 RMC/RMCGF Technical Regulations 2012 Edition: 27.02.2012 / Bull. 1
Version 2 Version 3 Radiator coolant 19.1 As glycol coolants are prohibited, plain water without any additives has to be used. Page 27 of 51 RMC/RMCGF Technical Regulations 2012 Edition: 27.02.2012 / Bull. 1
Page 1 and 2: APPROVED ROTAX MOJO MAX Challenge T
Page 3 and 4: 125 MAXDD2 Masters Dry (slick) tire
Page 5 and 6: It is not allowed to pass the end o
Page 7 and 8: 9.1 Technical Specification (within
Page 9 and 10: Cylinder 5.1 5.2 5.3 5.4 5.5.1 Ligh
Page 11 and 12: 5.7.3 The sealing flange for the ex
Page 13 and 14: 5.9 Exhaust valve (125 MAX only) If
Page 15 and 16: 9.2 Technical Specification (outsid
Page 17 and 18: 11.7 The pick up must be marked wit
Page 19 and 20: Centrifugal clutch 13.1 Dry centrif
Page 21 and 22: 13.3.2 Outer diameter of clutch dru
Page 23 and 24: Intake silencer 14.1 Intake silence
Page 25: 15.13 Optional carburetor plug scre
Page 29 and 30: 20.10 Additional to the standard is
Page 31 and 32: Piston with ring assy. 3.1 3.2 Orig
Page 33 and 34: 5.6 Height of cylinder has to be 86
Page 35 and 36: 5.7.4 The top edge of the exhaust p
Page 37 and 38: 5.9 If the piston is moved in direc
Page 39 and 40: 9.4 Technical Specification (outsid
Page 41 and 42: Exhaust valve 11.1 11.2 11.3 As sup
Page 43 and 44: 13.3 13.3.1 Steel clutch and clutch
Page 45 and 46: Drive gear Driven gear 32 65 33 64
Page 47 and 48: Carburetor 17.1 17.2 17.3 17.4 17.5
Page 49 and 50: Radiator 20.1 20.2 20.3 20.4 20.5 2
Page 51: 22.7 22.8 22.9 The original exhaust

ROTAX MOJO MAX Challenge Technical Regulations ... - The FMSCI

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?