ROTAX MOJO MAX Challenge Technical Regulations ... - The FMSCI
ROTAX MOJO MAX Challenge Technical Regulations ... - The FMSCI
ROTAX MOJO MAX Challenge Technical Regulations ... - The FMSCI
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Intake silencer 14.1 Intake silencer with integrated, washable air filter has to be<br />
used with all parts as shown at illustration and has to be<br />
mounted on the support bracket with two screws (in dry and<br />
wet race condition).<br />
Intake silencer tube (pos 2) as well as carburetor socket<br />
(pos 6) are only legal if marked with "<strong>ROTAX</strong>".<br />
Parts marked with "APRILIA" are no longer legal to be used.<br />
14.2<br />
14.3<br />
14.4<br />
Intake silencer case bottom is marked on the inside with the<br />
<strong>ROTAX</strong> part no. 225 015.<br />
Intake silencer case, top is marked on the inside with the<br />
<strong>ROTAX</strong> part no. 225 025.<br />
Air filter must be installed as shown in illustrations<br />
above.<br />
Page 23 of 51 RMC/RMCGF <strong>Technical</strong> <strong>Regulations</strong> 2012 Edition: 27.02.2012 / Bull. 1
Change language