trixbox2_without_tea.. - UV UTBM J. Millet - Free

Click the install or the upgrade button and webmin will be installed or upgraded.
You will now have to wait for the installation to finish, as there is no progress
indicator during the process. Patience is a virtue.
How long you will need to wait depends on the number of modules that you selected. If
you only select one module, it may only take a minute or so. If you selected more
modules it will take much longer. Once done, we can focus on the rest of the chores.
You are now ready to take the next step of installing freePBX modules as without these
you will not have the GUI interface for managing Trixbox. There are other GUI interface
that can be used but freePBX comes with Trixbox.
Before you proceed further, it is a good idea to upgrade to the latest freePBX because
by the time you install Trixbox, there is a good chance that there is a new version of
freePBX. Besides, Trixbox did not come with the latest version of freePBX.
To upgrade freePBX, go to the chapter relating to Upgrading freePBX.
4.2 INSTALLING FREEPBX MODULES
FreePBX is the GUI interface that Trixbox uses to manage the IP PBX.
Before you can use freePBX you need to install all the modules that you require. You
need to do this through freePBX.
On the Trixbox Admin Mode screen, hover the mouse pointer over the Asterisk tab and
select FreePBX from the dropdown list as illustrated below (see arrow).
The following screen will appear.
TRIXBOX-2 Without Tears Page 26 of 238