trixbox2_without_tea.. - UV UTBM J. Millet - Free

More documents

Recommendations

Info

You should get a page telling us that all modules were installed successfully. Then click return to go back to the modules list page. At this stage, click on the orange bar at the top of the page that says 'Apply Configuration Changes’ To confirm your intention, click on it. At the next prompt, select “Continue with reload” on the window that pops up. This reloads the Asterisk configuration and the orange bar will then go away. You will need to click on the orange bar anytime you make changes Before you go any further, you will check for modules updates that may be available or you may wish to include other extra modules that have been released since the installation of freePBX, online. TRIXBOX-2 Without Tears Page 28 of 238
We will go back to the Module Admin screen and lick on the “Check for update online” label as illustrated below. If there are updates that you need, simply select the necessary updated modules indicated in the list, click “Download and upgrade” radio button. The process is similar to the the initial installing and enabling of modules in the preceeding paragapgs. You can also uninstall or disable any module using this modular approach.. On completion, an orange bar at the top of the page that says 'Apply Configuration Changes’ will appear. Now click on it to confirm your intention then click 'Continue with reload' on the window that pops up. This reloads the Asterisk configuration and the orange bar bar will then go away. You can now click on ‘Setup’ tab next to the “Tools” tab to get to the modules you have just activated and finally start to configure the Trixbox IP PBX. TRIXBOX-2 Without Tears Page 29 of 238
Page 1 and 2: TRIXBOX-2 without Tears Incorporati
Page 3 and 4: For TRIXBOX 2.x with freePBX (Versi
Page 5 and 6: TABLE OF CONTENT Forward...........
Page 7 and 8: 17.1.4 Initiate a Call ............
Page 9 and 10: Appendix A.........................
Page 11 and 12: FORWARD Following the tradition of
Page 13 and 14: • Asterisk, the core PBX • Suga
Page 15 and 16: 2 INITIAL PREPARATION AND PLANNING
Page 17 and 18: • After initial system detection,
Page 19 and 20: • After a moment, it will continu
Page 21 and 22: Select [Yes] to set up networking a
Page 23 and 24: 4 SET-UP TRIXBOX Now, using your br
Page 25 and 26: It is this username and password th
Page 27: We are now in freePBX and this is w
Page 31 and 32: Voicemail: Change the Direct Dial t
Page 33 and 34: n N o p P([x]) r S(x) t T w W encou
Page 35 and 36: • User Extension: 2000 (that’s
Page 37 and 38: 5.3 FOLLOW ME After setting up the
Page 39 and 40: Now it’s a good time to set up yo
Page 41 and 42: Sometime it is necessary to change
Page 43 and 44: Call Forward This is pretty simple
Page 45 and 46: The reason why asterisk users have
Page 47 and 48: Outgoing Settings In the Trunk Name
Page 49 and 50: Incoming Settings In the User Conte
Page 51 and 52: 8 CALLS HANDLING 8.1 INBOUND ROUTES
Page 53 and 54: 8.2 TIME CONDITIONDS You can create
Page 55 and 56: o Time to finish: 17:30 o Week Day
Page 57 and 58: In your Dial Patterns box, you will
Page 59 and 60: 8.4 ENUM ENUM is a way for us to us
Page 61 and 62: 9 CUSTOM CONTEXTS MODULE The custom
Page 63 and 64: APPLY A CUSTOM CONTEXT TO EXTENSION
Page 65 and 66: • By recording directly using you
Page 67 and 68: 11 DIGITAL RECEPTIONIST Like most o
Page 69 and 70: The last extension (which we have c
Page 71 and 72: exten => s,1,Set(LANGUAGE()=it) ext
Page 73 and 74: Each IVR will act as a traffic cop
Page 75 and 76: 12.1 EDITING THE .CONF FILES A numb
Page 77 and 78: ; search => e164.arpa search => e16
Page 79 and 80:
13 CHECK YOUR SYSTEM After doing al
Page 81 and 82:
Scroll down to the SIP (or IAX if y
Page 83 and 84:
14.2 CREATE A ZAP TRUNK Next go int
Page 85 and 86:
; Autogenerated by /usr/local/sbin/
Page 87 and 88:
Chances are, Zaptel will be found.
Page 89 and 90:
User ID: Asterisk extension number
Page 91 and 92:
nat=no port=5061 for example type=u
Page 93 and 94:
15 PSTN TO VOIP GATEWAY If you are
Page 95 and 96:
16.2 DISA - USING FREEPBX Those usi
Page 97 and 98:
• Parked channels • Logged in A
Page 99 and 100:
To populate the HUDlite Admin, clic
Page 101 and 102:
After a few seconds, it will popula
Page 103 and 104:
18 CALL PARKING AND TRANSFER Trixbo
Page 105 and 106:
his office door is being locked fro
Page 107 and 108:
The result is, when there is an onc
Page 109 and 110:
• This conference room number is
Page 111 and 112:
20 VOICEMAIL If you have enabled v
Page 113 and 114:
; Change the email body, variables:
Page 115 and 116:
20.3.2 Method 2 1. From freePBX Set
Page 117 and 118:
22 WEATHER REPORTS The existing wea
Page 119 and 120:
First we will use putty to make a b
Page 121 and 122:
23 REMOTE MANAGEMENT Some may want
Page 123 and 124:
24.2 IAX.CONF The following is the
Page 125 and 126:
24.4.2 Accounts options Next click
Page 127 and 128:
To play the recording, simply click
Page 129 and 130:
#permit=192.168.1.0/255.255.255.0 r
Page 131 and 132:
28 SPEED DIAL Sometime you may just
Page 133 and 134:
The Speed Dial Prefix *0 can be fou
Page 135 and 136:
This setting means the Windows Mess
Page 137 and 138:
System 1 System 2 Outbound Routing
Page 139 and 140:
30.4 THINKING OF MORE THAN 2 BOXES
Page 141 and 142:
31 CUSTOMISED VOICE The default pre
Page 143 and 144:
• If your sound files were record
Page 145 and 146:
andom=yes #include musiconhold_addi
Page 147 and 148:
The http://128.177.3.80:4064/ (SKY.
Page 149 and 150:
33 BACKUP AND RESTORE Backup and Re
Page 151 and 152:
33.2 TO RESTORE A BACKUP Backup its
Page 153 and 154:
You should now be able to dial from
Page 155 and 156:
36 CODEC (CODER DECODER) When makin
Page 157 and 158:
Download the required file(s) For t
Page 159 and 160:
37 PSTN TRUNK - SPECIAL HANDLING 37
Page 161 and 162:
38 PORT FORWARDING AND QOS - ROUTER
Page 163 and 164:
39 UPGRADING YOUR SYSTEM Mostly eve
Page 165 and 166:
This will break PA1688 based phones
Page 167 and 168:
41 USE ACCESS TO CONNECT TO DATABAS
Page 169 and 170:
Select the Uer DSN tab and click on
Page 171 and 172:
Select Tables as illustrated by the
Page 173 and 174:
When you press OK, the CDR table wi
Page 175 and 176:
43 TROUBLE SHOOTING With any instal
Page 177 and 178:
A quick fix for TRIXBOX is to creat
Page 179 and 180:
43.13 ALL EXTENSIONS FAILED TO WORK
Page 181 and 182:
*43 Echo Test *52 Call Forward No A
Page 183 and 184:
iax set jitter: Sets IAX jitter buf
Page 185 and 186:
A.5 INDICATIONS FOR VARIOUS COUNTRI
Page 187 and 188:
usy = 425/480,0/480 ring = 425/1000
Page 189 and 190:
stutter = 350+375+400 [il] ; Source
Page 191 and 192:
congestion = 425/200,0/200 callwait
Page 193 and 194:
info = 950/330,0/15,1400/330,0/15,1
Page 195 and 196:
B.1.3 Faktortel (IAX) Peer Details
Page 197 and 198:
Register String: 091xxxxx@sip01.myn
Page 199 and 200:
B.3 - OTHER VSPS (TRUNKS) B.3.1 Bro
Page 201 and 202:
APPENDIX C Details for Asterisk Sou
Page 203 and 204:
APPENDIX D (ATAS AND ROUTERS) D.1 A
Page 205 and 206:
2. Select Admin Login and then sele
Page 207 and 208:
E.2 MULTIPLE TDM400P INSTALLATION N
Page 209 and 210:
E.3 ELIMINATING ECHO PROBLEMS IN SP
Page 211 and 212:
try and keep the sound levels at a
Page 213 and 214:
channel=>1 zapata.conf ; ; Zapata t
Page 215 and 216:
1) We’ll need to set-up the drive
Page 217 and 218:
A way to be sure that discs have be
Page 219 and 220:
# Creates the root (/) partition th
Page 221 and 222:
echo "# Do not remove the following
Page 223 and 224:
E.8 V2.2 TRIXBOX LOAD CONFIG TO INC
Page 225 and 226:
slang-devel sox speex unixODBC vsft
Page 227 and 228:
APPENDIX F (PUBLICATIONS AND REFERE
Page 229 and 230:
EXTENSION NUMBERS TO AVOID USING Un
Page 231 and 232:
include => app-recordings include =
Page 233 and 234:
BUGS REPORTS Software is not softwa
Page 235 and 236:
Question is; how do we get around t
Page 237 and 238:
BIBLIOGRAPHY The real people behind
show all

trixbox2_without_tea.. - UV UTBM J. Millet - Free

Create successful ePaper yourself

Delete template?

Save as template?