trixbox2_without_tea.. - UV UTBM J. Millet - Free
trixbox2_without_tea.. - UV UTBM J. Millet - Free
trixbox2_without_tea.. - UV UTBM J. Millet - Free
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
; 'from-trunk', rather than 'from-sip-external'. You'll know this is happening if when<br />
; you call in you get a message saying "The number you have dialled is not in service.<br />
; Please check the number and try again."<br />
context = from-sip-external ; Send unknown SIP callers to this context<br />
callerid = Unknown<br />
tos=0x68<br />
useragent = Trixbox<br />
; #, in this configuration file, is NOT A COMMENT. This is exactly how it should be.<br />
#include sip_nat.conf<br />
#include sip_custom.conf<br />
#include sip_additional.conf<br />
7.4.2 Oztell (SIP)<br />
Oztell requires the numbers dialled to follow international format Country code + area<br />
code + phone number. To call Sydney 67541234, Oztell requires it in the following<br />
format 61 267541234. To use Oztell family cheap rate you can also prefix it with 09.<br />
Therefore the dialling rule will be in this form:<br />
We need various patterns here:<br />
Pattern<br />
Explanation<br />
899060X. This pattern tells Oztell to dial the inter Oztell’s numbers<br />
This pattern dials numbers start with 60 followed by a one<br />
digit number 1-9 followed by other numbers minimum of 2<br />
60ZXX.<br />
digits from 0 -9. This can be an international number with a<br />
Country code of 60 followed by a number between 1 and 9<br />
inclusive.<br />
06612+NXXXXXXX Using the Oztell 06 rate to dial any NSW number.<br />
0661+NXXXXXXXX Using Oztell 06 rate to dial any Australian number.<br />
61+1300XXXXXX Dials 1300 numbers<br />
61+13ZXXX Dials 13 numbers<br />
61+1800XXXXXX Dials 1800 numbers<br />
In your Outgoing Dial Rules box, it will look like this:<br />
– this is simply an example based on my setting;<br />
yours will no doubt be different.<br />
899060X.<br />
60ZXX.<br />
06612+NXXXXXXX<br />
0661+NXXXXXXXX<br />
61+1300XXXXXX<br />
61+13ZXXX<br />
61+1800XXXXXX<br />
Next we need to create the Outgoing Setting, Incoming Settings and Registration for<br />
Oztell.<br />
Outgoing Settings<br />
In the Trunk Name, enter the name of this trunk: oztellsip (as an example)<br />
In the Peer Details we will need the<br />
following;<br />
You must enable all the codecs that you want to<br />
use through Oztell’s web page.<br />
allow=ulaw&alaw<br />
canredirect=no<br />
disallow=all<br />
dtmfmode=rfc2833<br />
fromuser=899060xxxxx<br />
host= sip2.syd.net2max.com<br />
insecure=very<br />
secret=Password<br />
type=peer<br />
username=899060XXXXX<br />
TRIXBOX-2 Without Tears Page 48 of 238
Change language