Service Manual - Haldex
Service Manual - Haldex
Service Manual - Haldex
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
5. Fit the new brake chamber (A) to the calliper<br />
(B) with nuts (E), see figure 39. Screw the<br />
nuts home first before torque tightening to<br />
ensure the brake chamber seats parallel.<br />
Brake chamber fixation nut tightening torque<br />
is 180±20Nm.<br />
IMPORTANT!<br />
Do not mix up the hoses!<br />
6. Fit the brake chamber hose connection of<br />
the service brake (C) and if applicable the<br />
parking brake (D). If fitting both hoses, ensure<br />
connections (C) and (D) are the correct way<br />
around. See figure 39.<br />
Replacement Procedures<br />
ModulT_033 C<br />
D A<br />
Figure 39. Installation of brake chamber items<br />
F<br />
E<br />
B<br />
39