CSP Gateway Configuration Guide - InterSystems Documentation
CSP Gateway Configuration Guide - InterSystems Documentation
CSP Gateway Configuration Guide - InterSystems Documentation
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>CSP</strong> Web <strong>Gateway</strong> Management Page<br />
Maximum Cache Size<br />
Maximum Cache Size<br />
This represents the maximum amount of shared memory to be reserved for the purpose of caching <strong>CSP</strong> response<br />
data.<br />
The cache size may be specified as follows:<br />
In Bytes<br />
In Kilobytes<br />
In Megabytes<br />
n<br />
nK<br />
nM<br />
The default value for this parameter is 250K – which is the amount of memory typically required to cache the<br />
static components used in the <strong>CSP</strong>/Zen samples. This value can be raised or lowered as required.<br />
Changes to the Maximum Cache Size parameter will only take effect after a <strong>Gateway</strong> (or hosting web server)<br />
restart.<br />
2.1.6.2 Security<br />
If a user name and password are defined here, then all system managers must provide this user name and password to access<br />
the <strong>CSP</strong> Web <strong>Gateway</strong> Management page.<br />
If you forget the password, manually edit the <strong>Gateway</strong> configuration file <strong>CSP</strong>.ini and remove the Username and Password<br />
parameters from the SYSTEM section of this file. Then you can access the <strong>CSP</strong> Web <strong>Gateway</strong> Management page without<br />
a username and password and enter a new username and password if required.<br />
[SYSTEM]<br />
Username=cm<br />
Password=1Bx4tt88mttAWaf7isJg3Urqc2zE<br />
You can configure the following <strong>CSP</strong> security parameters:<br />
Access to these forms<br />
User Name<br />
Password<br />
Enable or disable access to the <strong>CSP</strong> Web <strong>Gateway</strong> Management page using this option. The default is Enabled.<br />
When access is Disabled you cannot re-enable access using the <strong>CSP</strong> Web <strong>Gateway</strong> Management page. To re-enable<br />
access, manually edit the configuration file <strong>CSP</strong>.ini. Set the SM_Forms parameter to Enabled in the SYSTEM<br />
section of this file.<br />
[SYSTEM]<br />
SM_Forms=Enabled<br />
User name required to access the <strong>CSP</strong> Web <strong>Gateway</strong> Management page.<br />
Password required to access the <strong>CSP</strong> Web <strong>Gateway</strong> Management page.<br />
Password (Confirm)<br />
When the password is modified, confirm the new value here.<br />
<strong>CSP</strong> <strong>Gateway</strong> <strong>Configuration</strong> <strong>Guide</strong> 17